This two-component epoxy resin system is formulated for model making and tooling applications. After mixing and application to model surfaces, it cures into a material with excellent machining properties suitable for milling, planing, cutting, and drilling operations.

• Superior machining performance with minimal tool wear
• Excellent surface finish quality after processing
• Non-cracking during cutting operations
• Easy polishing, repair, and modification capabilities
• High dimensional stability and accuracy
• Non-toxic and environmentally friendly formulation
• Cost-effective mold production solution

• Wind power blade male dies and cabin cover molds
• Automotive master models and casting mold boards
• Checking fixture production and foundry applications
• Sheet metal forming molds and tensile modulus
• Foaming molds, vacuum forming, and injection molds
• Composite materials forming molds
• Rapid prototyping and small batch plastic production

• Mix components thoroughly in 1:1 ratio until uniform color
• Use vacuum mixer to minimize bubble formation
• Apply maximum single layer thickness of 40 mm
• Allow complete curing before machining (6-8 hours at 20-25°C)
• For optimal results, post-cure at 80°C for 8 hours or 3 days at room temperature
• Apply mold release agents for easy demolding