Rubber Based High Bonding Hot Melt PSA Adhesive For Diaper
DESCRIPTION
The JaourMelt ® is a synthetic rubber based hot melt adhesive specifically developed for construction applications of nonwoven disposables. The product is florescent free, light color and with excellent heat stability. It is with good machinability and provides good penetration and wettability to various substrates, high bond strength and tack.
SUGGESTED USES
Premium grade of construction adhesive for nonwoven disposable applications.
TYPICAL PROPERTIES
| Appearance | Water white translucent solid |
| Color (Gardner) | ≤ G2 |
| Softening Point (R&B) | approx. 81°C |
| Viscosity (Brookfield) | |
| @120 ° C | approx.7,800 cps |
| @140 ° C | approx.3,200 cps |
| @160 ° C | approx.1,450 cps |
| @180 ° C | approx. 700cps |
OPERATING GUIDES
The material can be applied by all types of elastic spray and slot applicators. Suggested operation temperature is 150 - 180 ° C, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg block wrapped with siliconized release paper, 20kg/box, or with meltable film, 20 or 25kg/box.
Please consult the sales representative for further information.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35 °C and above 10 °C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.Rotate stocks and using the oldest stock first.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.