BRPV3-1000 Type 2 Solar PV Surge Arrester 40kA 1000V DC Lightning Protection Device for Photovoltaic Systems
The BRPV3-1000 Type 2 Solar PV Surge Arrester is a high-performance DC surge protection device designed specifically for photovoltaic power generation systems. With a maximum discharge capacity of 40kA and operating voltage of 1000V DC, this Class II SPD provides robust protection against lightning-induced surges and transient overvoltages.
| Parameter | Value |
|---|---|
| SPD Classification (EN61643-11) | Type 2 |
| SPD Classification (EN50539-11) | Class II |
| Max Continuous Operating DC Voltage (Ucpv) | 1000V |
| Nominal Discharge Current (8/20μs) | 20kA |
| Max Discharge Current (8/20μs) | 40kA |
| Voltage Protection Level [(DC+/DC-)->PE] | ≤4.0kV |
| Response Time | ≤25ns |
| Operating Temperature Range | -40℃ to 80℃ |
| Cross-Section Area (Min/Max) | 4mm² to 35mm² |
| Mounting | 35mm DIN Rail |
| Enclosure Material | Thermal Plastic UL94-V0 |
| Degree of Protection | IP20 |
- High energy metal oxide varistors (MOV) technology
- Fast response time ≤25ns with low residual voltage
- Built-in over current and over heat protection
- Temperature control open circuit technology
- Pluggable module design for easy replacement
- Visual status indication (green/red LED)
- Remote connection capability for monitoring
- Multi-level protection circuit design
This surge protector is specifically designed for photovoltaic power supply networks, providing essential protection for critical components including:
- Solar inverters
- Combiner boxes
- Charge controllers
- Wind power generation systems
- Connect grounding wire to lightning protection system ground
- Install on 35mm standard DIN rail
- Ensure proper discharge current path routing
- Maintain short, thick, and straight connection lines
The photovoltaic lightning arrester utilizes advanced multilevel protection circuits with high-performance sensitivity resistance plates. When high voltage surges threaten equipment insulation, the arrester immediately diverts the current to ground, limiting voltage amplitude and protecting connected equipment.
17 Years Manufacturing Experience: Professional production of electrical surge protection devices with comprehensive quality control systems.
Certifications: TUV, CE, CB certified products with individual testing prior to shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.