DM542 Step Drive Digital 18V~60VDC Nema17/23 Stepper Motor Controller

Price Negotiable

Price: US$15.8 ~ US$23.5

MOQ: 3-10pcs

Delivery Time: For samples , 7-15 days / For batch , 15-25days

Brand: Jkongmotor

Product Description

DM542 step drive digital 18V~60VDC Nema17/23 stepper motor controller

Overview:

The connection between the driver and the two-phase hybrid stepping motor is four-wire. The motor windings are connected in parallel and in

series, and the connection method is good. The high-speed performance is good, but the driver current is large (1.73 times the motor winding

current). The drive current is equal to the motor winding current.

Features
Input voltage	18~60V DC
Output current	1.0A~4.2A(Peak)
Input current	<4A
Humidity	Not condensation, no water droplets
Consumption	Consumption:80W
Using environment	-10 ~ 45 ℃, avoid dust and corrosive gas
Storage environment	-40~+70℃
Weight	200g

Adjustment of troubleshooting
Alarm indicator	Reasons	Measures
LED off turn	Wrong connection for power	Check wiring of power
LED off turn	Low-voltages for power	Enlarge voltage of power
Motor doesn’t run, without	Wrong connection of stepper motor	Correct its wiring
holding torque	RESET signal is effective when offline	Make RESET ineffective
Motor doesn’t run, but maintains	Without input pulse signal	Adjust PMW & signal level
holding torque	Without input pulse signal	Adjust PMW & signal level
Motor runs wrong direction	Wrong wires’ connection	Change connection for any of 2 wires
Motor runs wrong direction	Wrong input direction signal	Change direction setting
Motor’s holding torque is	Too small relative to current setting	Correct rated current setting
Motor’s holding torque is	Acceleration is too fast	Reduce the acceleration
Motor torque is too small	Motor stalls	Rule out mechanical failure
Motor torque is too small	Driver does not match with the motor	Change a suitable driver