Shielding Spring Brass PA Claw EMC Cable Gland 18MM Thread
Factory EMC Metal Nickel Plated Brass Cable Gland 18MM-25mm For Cable Protection
Product characteristics
- Spring shielding layer is adopted, the contact surface of bottle blank is large and the installation efficiency is high.
- The use of tetrafluoro gaskets can reduce friction between rubber and metal surfaces and improve service life.
- The product realizes the contact sealing between clamping ring and cable surface, which has little damage to cable and can effectively prevent the internal of motor or controller.
- The inner rubber is made of silica gel, which can meet the normal work of the product in extremely cold weather.
Uses: to connect the LED lamp line interface, the laying of the circuit cable, the connection of the electric box cable; it can also be used in the cable connection of the manufacturing industry equipment, the line connection of the robot industry, the connection of the charging pile line, and the application in the new industries such as wind energy and solar energy
| Item | Range Φ mm |
Tread Length GL mm |
Joint Length mm |
Spanner size mm |
Code | |||
| M | PG | G | NPT | |||||
| M12×1.5 | PG7 | G1/4 | NPT1/4 | 3-6.5 | 6.5 | 21 | 14 | HX-EMC- “Item”-T |
| 4-8 | 8 | 21 | 17/14 | |||||
| M16×1.5 | PG9 | 3-6 | 8 | 25 | 18 | |||
| 4-8 | 8 | 25 | 18 | |||||
| 5-10 | 8 | 25 | 20/18 | |||||
| M18×1.5 | PG11 | G3/8 | NPT3/8 | 5-10 | 8 | 25 | 20 | |
| M20×1.5 | PG13.5 | G1/2 | NPT1/2 | 6-12 | 8 | 29 | 22 | |
| 10-14 | 8 | 29 | 24/22 | |||||
| M22×1.5 | PG16 | 10-14 | 8 | 29 | 24 | |||
| M25×1.5 | G3/4 | NPT3/4 | 10-14 | 9 | 30 | 24/27 | ||
| PG21 | 12-16 | 9 | 30 | 27 | ||||
| 13-18 | 9 | 30 | 30/27 | |||||
| M32×1.5 | 15-22 | 10 | 32 | 35 | ||||
| PG29 | G1 | NPT1 | 18-25 | 10 | 32 | 40/35 | ||
| M40×1.5 | 18-25 | 11 | 35 | 40/45 | ||||
| 22-30 | 11 | 35 | 45 | |||||
| PG36 | G1-1/4 | NPT1-1/4 | 25-33 | 11 | 35 | 50/45 | ||
| M50×1.5 | PG42 | G1-1/2 | NPT1-1/2 | 32-38 | 13 | 39 | 57/55 | |
| M63×1.5 | PG48 | G2 | NPT2 | 37-44 | 14 | 40 | 64/68 | |
| 42-52 | 14 | 40 | 78/68 | |||||
Effect
Make the line unblocked, keep the cable sealed, and ensure the insulation level at the cable joint, so that it can run safely and reliably. If improper sealing, not only will oil leak cause oil-immersed paper drying, but also moisture will intrude into the cable interior, making paper insulation performance decline.
Our cable gland has a wide range of uses, which can be used to connect the LED lamp line interface, the laying of the circuit cable, the connection of the electric box cable; it can also be used in the cable connection of the manufacturing industry equipment, the line connection of the robot industry, the connection of the charging pile line, and the application in the new industries such as wind energy and solar energy. The cable connector has corrosion resistance and can be applied to marine operations, chemical equipment and so on.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.