Panel Mounted Ultrasonic Flow Meter with Double Power Supply RS485 Communication and 15~6000mm Pipe Diameter
KUF2000 series ultrasonic flow meter usually is used in long-term measurement at field. It has three types of sensor to measure the pipe flow:
- Clamp on type: The sensors clamp on to the outside of pipes and do not come in contact with the internal liquid. And all the models can become energy meters when connecting to temperature sensors. KUF2000 Series Clamp On Ultrasonic Flowmeter is easy for installation, no need to cut off the pipe and water, no press loss. It support measuring online long-term. Wide range of liquid flow can be measured with the sensor clamped on the pipe.
- Insertion type: Only two installation holes are needed on the pipe, user can install the insertion type sensors. By using the hole making tool, the no stop flow installation can be realized. Sensors contact to the fluid directly, the measurement is stable and reliable.
- Inline pipe type: DN15-32 pipes uses π shape inline pipe sensor, DN40 and above uses standard inline pipe sensor. The inline sensors has the advantages of low starting flow rate, high measurement accuracy and no pressure loss.
The KUFS2000B flow meter is designed to be installed in instrument panel. And it can measure heat if add temperature sensor. Also SD card can be added for large quantity data saving.
|
Host part |
Principle |
Ultrasonic time gap |
|
Accuracy |
±1% |
|
|
Display |
2×20 character LCD with backlight, support the language of Chinese, English and Italy Convertor dimension:170*180*56cm |
|
|
Signal output |
1 way 4~ 20mA output, electric resistance 0~ 1K,accuracy0. 1% |
|
|
1 way OCT pulse output( Pulse width 6 ~ 1 0 0 0 ms,default is 2 0 0 ms) |
||
|
1 way Relay output |
||
|
Signal input |
3 way 4~ 20mA input, accuracy 0. 1%,acquisition signal such as temperature, press and liquid level |
|
|
Connect the temperature transducer Pt100, can finish the heat/energy measurement |
||
|
Data interface |
Insulate RS485 serial interface, upgrade the flow meter software by computer, support the MODBUS, METER-BUS etc. |
|
|
Cable |
Twisted-pair cable, generally, the length under 50 meters; |
|
|
Pipe Condition |
Pipe material |
Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed. |
|
Pipe Diameter |
15~6000mm |
|
|
Straight length pipe |
Transducer installation should be satisfied: upstream10D, downstream 5D, 30D from the pump. |
|
|
Medium |
Type of Liquid |
Water, sea water, waste water, oil, chemicals (alcohol, acids, etc.), plant effluent and other liquids |
|
Temperature |
-30~160°C |
|
|
Turbidity |
10000pm not so much baubles |
|
|
Flow speed |
0~±10m/s |
|
|
Environment |
Temperature |
Host: -20~60°C; Sensor: -30~160°C |
|
Humidity |
Host: 85%RH; Flow sensor: IP68, less than 2m under water |
|
|
Power supply |
DC8~36V or AC85~265V( optional) |
|
|
Consumption |
1.5W |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.