Round Shape Tungsten Carbide Rings Dimensions Customized Wear Resistance
Price:
Negotiable
MOQ:
negotiate
Delivery Time:
15-20 working days
Brand:
VKD
Product Description
Round Shape Tungsten Carbide Rings Dimensions Customized Wear Resistance
cemented carbide roll rings (also known as tungsten carbide roll ring) possesses good thermal conduction property.Compared with other materials,it is much better in terms of heat-resistance, wear-resistance and strength.What ’s more,its hardness reduces a little under the condition of high temperature.So ,the cemented carbide roll rings is invented with the ap-pearance of
high speed wire rod mill.With the development and improvement,it is widely applied in the production of high speed wire,bar and deformed steel bar.
| Grade | Chemical composition |
Mechanical properties | Physical properties | |||||
Co+Ni % |
WC % |
Hardness HRA |
Transveres rupture strength (Sample B) MPa |
Compressive Strength MPa |
Young's modulus of elasticty KN/mm2 |
Density g/cm3 |
Thermal conductivity Cal/cm sec/℃ |
|
| YGH20 | 10 | 90 | ≧86.0 | ≧2500 | 3500 | 560 | 14.2-14.5 | 0.2 |
| YGH25 | 12 | 88 | ≧84.0 | ≧2300 | 3400 | 550 | 14.0-14.3 | 0.21 |
| YGH30 | 15 | 85 | ≧83.5 | ≧2520 | 3300 | 540 | 13.8-14.2 | 0.2 |
| YGH40 | 18 | 82 | ≧83.0 | ≧2570 | 3200 | 500 | 13.4-13.9 | 0.19 |
| YGH45 | 20 | 80 | ≧82.0 | ≧2570 | 3100 | 480 | 13.3-13.9 | 0.18 |
| YGH55 | 26 | 74 | ≧81.0 | ≧2570 | 3000 | 450 | 12.6-13.2 | 0.17 |
| YGR20 | 10 | 90 | ≧85.0 | ≧2400 | 3400 | 550 | 14.2-14.8 | 0.2 |
| YGR25 | 12.5 | 87.5 | ≧83.0 | ≧2270 | 3300 | 540 | 14.0-14.3 | 0.22 |
| YGR30 | 15 | 85 | ≧83.0 | ≧2360 | 3200 | 530 | 13.8-14.3 | 0.2 |
| YGR40 | 18 | 82 | ≧82.0 | ≧2400 | 3200 | 430 | 13.5-13.9 | 0.2 |
| YGR45 | 20 | 80 | ≧80.5 | ≧2250 | 3000 | 480 | 13.4-13.9 | 0.18 |
| YGR55 | 25 | 75 | ≧79.0 | ≧2400 | 2800 | 420 | 12.9-13.4 | 0.17 |
| YGR60 | 30 | 70 | ≧78.5 | ≧2200 | 2600 | 300 | 12.6-13.1 | 0.16 |
| Grade | Recommended applications |
| YGH20 | Maximum hardness ,excellent wear resistance in the series.Used in the last 1-2 stands of good high speed line mills for rolling common and hard bars. |
| YGH25 | Higher wear resistance,moderate impact resistance in the series.Used in the last 1-3 stands of good high speed line mills for rolling common and hard bars. |
| YGH30 | Moderate wear resistance and impact resistance,good for general purposes.Used in the last 1-4 stands of finish rolling mills. |
| YGH40 | Best for general purposes.Used in the front stands of good mills and in the rear stands of common mills. |
| YGH45 | Used in the first and second stands of finish rolling mills and in the stands of prefinish rolling mills.For every stand of the rolling lines for low speed rolling,low precision and unstable operation. |
| YGH55 | Maxmum binder content in YGH series,good toughness and crack resistance.Used in the stands of perfinish rolling mills and for rolling screw thead steel |
| Grade | Recommended application | |||||||
| YGR20 | High wear resistance and corrosion resistance.Used in the last 1-2 stands of finish rolling mills. | |||||||
| YGR25 | High wear resistance and corrosion resistance.Used in the last 1-3stands of finish rolling mills. | |||||||
| YGR30 | Good toughness,wear resistance,corrosion resistance and crack resistance.Used in the middie and rear stands of finish rolling mills. | |||||||
| YGR40 | Good toughness and thermal crack resistance,dood for general purposes.Used in the most stands of finish rolling mills and in the rear stands of common mills. | |||||||
| YGR45 | Good toughness and thermal crack resistance,Used in the front stands of finish rolling mills. | |||||||
| YGR55 | Good impact resistance.Used in the stands of prefinish rolling mills for hot rolling screw thread steel bars and they, can be machined with turning and milling. | |||||||
| YGR60 | Good impact resistance and toughness. Used for hot rolling screw thread steel bars and in the first and second stands of prefinish rolling mills. | |||||||
As far as the material for our products,there are two series as Wc-Co and Wc-Co-Ni-Cr which possess the good compre-hensive mechanical properties.The bending strength and impact toughness reach 2200 Mpa and(4-6) x106J/ m'respectively.Its hardness and wear resistance come from tungsten carbide (Wc) while the toughness and strength depend on the binding agent
(Co-Ni-Cr).
At present,the finishing mill is generally composed of 8- 10 stands.Because of the big size of fracture surface of rolled part,the collar on the front stands of finishing mill may resist heavy duty and
strong impact.Thus,the high hardness and good thermal fatigue resistance are the primary factors,which are prior to wear-resistance.While there is low load and impact for therear stands, we shall pay more attention to the wear-resistance and thermal fatigue resistance of roll rings.
At present,the finishing mill is generally composed of 8- 10 stands.Because of the big size of fracture surface of rolled part,the collar on the front stands of finishing mill may resist heavy duty and strong impact.Thus,the high hardness and good thermal fatigue resistance are the primary factors,which are prior to wear-resistance.While there is low load and impact for therear stands, we shall pay more attention to the wear-resistance and thermal fatigue resistance of roll rings
The allowable deviation of carbide roll rings
Radial runoutofgroove ≤ 0.013mm
Radial runout of periphery ≤0.01 3mm
End face runout ≤ 0.02mm
End face planeness ≤ 0 .01mm
End face parallelism ≤ 0.01mm
Innerholecylindericit ≤ 0.01mm
Roughness of carbide rolls
inner hole roughness 0.4 u m
periphery roughness0.8 u m
end face roughness 0.4 u m
Welcome your inquiry.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Zhuzhou Weikeduo Cemented Carbide Co., Ltd.
Location
Room 411, Building B, Smart Cube, No. 460, Jinshan Road, Hetang District, Zhuzhou City, Hunan Province
Contact Person
Cathy Wang