99.9% Accuracy 0.65 - 1.1 KW 3T/H Grain Color Sorter Machine

Grain Color Sorter Machine Introduction

The materials to be sorted enter the color sorter from the hopper at the top. With the vibration of the vibrator, the materials to be sorted slip along the channel into the observation area in the sorting chamber and go through the sensor and background plate. Under a light source, based on the light intensity and color change, the system generates an output signal to drive the running of the magnetic valve and blow the different color particles into the waste chamber of loading hopper, and good materials fall into the finished product chamber of loading hopper for the purpose of sorting.

Grain Color Sorter Machine Working Principles

Granule material comes into the hopper, from there it goes into the vibratory feeder. The feeders spread and leveled the material to a single-layer flow along the chutes.
Two group of sensors(cameras) are installed at the two sides of the inspecting area. The single-stream e.g. Cereal is scanned by the sensors. The image data is delivered into signal processor. After signal analysis, an air flow pulse is generated to blow the unwanted material into the rejected hopper,and good material slip into the accepted hopper due to no operation of ejectors.

Remarks: The above parameters are tested results based on Polished round rice with the sigle chute 1-3T/H capacity. Actual capacity may vary according to raw material contamination ratio.

Grain Color Sorter Machine Application

1. Rice

2. Cereals

3. Industrial

4. Others