Customized Rod Type Downhole Pumps Spray Metal Plunger
Customized Sturdy And Durable Rod Type Downhole Pumps
Customized sturdy and durable rod type downhole Pump description:
A downhole Sucker Rod Pump is used on onshore sites to create a mechanical lifting motion. This motion is created by a series of valves, plungers, rod strings and rods that are assembled together as a pumping system.
Long plunger and antisand sticking pump is improved based on the long plunger tubing pump by adding a sand setting tube and a joint, thus preventing the pump from being stuck by sand.
Long plunger and anti-sand sticking pump can be used in the wells of sand content about 0.8%, and consists of a barrel assembly, a plunger assembly and a sand control assembly.
The pump has long plunger and short barrel so that the plunger seals the barrel all the time.
Because of the special heat treatment towards the inside surface of the barrel, it is much better than the standard barrel in
anti-wear and anticorrosion capacity.
RH model technical specification table:
| RH pump model | OD of pump (in) | Barrel length (ft) | Plunger length (ft) | Stroke length (ft) | Extension length (ft) | Tubing size EUE(in) |
| 15-106RHBC | Ø26.99 | 1.9" | ||||
| 20-125RHAC | Ø31.75 | 2.1-10 | 0.3-8.0 | 1.2-9.0 | 0.3-0.9 | 2-3/8” |
| 20-125RHBC | ||||||
| 25-150RHAC | Ø38.10 | 2-7/8” | ||||
| 25-150RHBC | Ø38.10 | |||||
| 25-175RHAC | Ø44.45 | |||||
| 25-175RHBC | ||||||
| 30-225RHBC | Ø57.15 | 3-1/2" | ||||
| 30-225RHAC |
Pump packings in truck photo:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.