Diameter 400mm HP Graphite Electrodes With Nipple High Power
Price:
Negotiable
MOQ:
20MT
Delivery Time:
10 work days
Brand:
SHIDA CARBON
Product Description
Diameter 400mm HP Graphite Electrodes With Nipple High Power
Graphite electrode, mainly from the domestic petroleum coke and imported needle coke, is widely used in electric arc furnace,ladle furnace, submerged arc electric furnace for theproduction of alloy steel, metal and nonmetallic materials.
Usage:
- Screw lifting plug into socket of one end and place soft protection material under the other end to avoid damaging nipple;
- Blow dust and dirt on the surface and socket of electrode and nipple with compressed air; use brush to clean if compressed air cannot do it well ;
- Use a proper torque value (see recommended torque value table) to properly lock electrode;
- In order to avoid crushes during furnace charging, please place bulk materials at the furnace bottom; meanwhile please do not place lime or any other non-conductive materials right under the electrodes, otherwise it will decrease electric conduciveness and cause breakage;
R&D Results
| Sichuan University | Basic research on graphite electrode | UHP electrode and nipple have been converted to productivity in raw material selection, formulation, kneading principle and graphitization technology |
| Hunan University | Carbon base and anode material | Mastered the technology of anode materials |
| Guiyang Aluminum and Magnesium Design Institute | Graphitized cathode and electric calcination | Solve the problem of high temperature electric calcination technology |
Shida Carbon Graphite Electrode Properties
| Item | Unit | UHP | HP | RP | UHP Nipple | HP Nipple | |||
| 450-500mm | 550-700mm | 450-500mm | 550-700mm | 400-450mm | 500-700mm | ||||
| Bulk Density | g/cm3 | 1.66-1.73 | 1.68-1.75 | 1.60-1.70 | 1.62-1.72 | 1.55-1.65 | 1.54-1.64 | 1.80-1.85 | 1.72-1.80 |
| Resistivity | μΩm | 4.8-6.0 | 4.5-5.8 | 5.2-7.5 | 5.5-7.2 | 7.5-9.0 | 8.0-9.5 | 3.0-4.3 | 4.0-6.0 |
| Flexual Strength | MPa | 10.5-15.0 | 10.0-14.0 | 10.5-14.5 | 9.0-13.5 | 8.0-11.0 | 7.0-10.0 | 20.0-30.0 | 18.0-25.0 |
| Elastic Modulus | GPa | 8.0-10.0 | 8.0-12.0 | 6.0-9.3 | 16.0-20.0 | 12.0-16.0 | |||
| CTE (30-600) | 10-6/℃ | ≤1.5 | ≤2.2 | ≤2.8 | ≤1.3 | ≤2.0 | |||
| Ash Content | % | ≤0.3 | ≤0.3 | ≤0.5 | ≤0.3 | ≤0.3 |
|||
Baking System:Car bottom baking furnace
Impregnation System:Fully automatic,high vacuum and pressure,hot in-cool out.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SICHUAN GUANGHAN SHIDA CARBON CO., LTD.
Location
Room 1011, 47 Yongfeng Road, Hi-Tech District, Chengdu, 610041,Sichuan Province, P.R. China.
Contact Person
Angela Zhang