Calcium Fertilizer Granules Crushing into Powder Grinder or Crusher with cheaper price

introduction

The transmission mode of the cage grinder is divided into double-sided motor transmission. The cylinder is welded on a frame welded by channel steel, and the rotor is inside the cylinder. The main shaft is respectively seated on both sides of the cylinder and connected with the motor through a belt. The inlet is opened on one side of the cylinder, and the outlet is under the shelf. The whole pulverizer is supported by four legs. When the pulverizer is in production, the motor drives the two concentric main shafts to rotate in opposite directions. The material enters the inner cage through the feed port, and then enters the outer cage after being crushed. The material is continuously impacted by the steel rod on the cage between the two rotating cages and is crushed, so that the material powder is more broken and the effect is better.

technical parameters