Double Facing Continuous Phenolic Sandwich Panel Machine
Phenolic Continuous Panel Line
General specification:
The production line is mainly used for the continuous production of double facing sheet aluminum foil phenolic foam panel materials, also can be suitable for other soft facing sheet panel materials, and upper and lower facing sheet soft materials have a one time forming along with the heat laminator during the production.
1.Equipment requirements:
The valid length of the machine:18000 mm
The valid width for panel:1220 mm
The valid height for panel:20-100 mm
The production rate: 0-5 m/min, The rated production speed::2.5 -3.5m/min
The flow rate of the pouring machine: 2-10 kg/ min,Length is customer made.
2.Productivity:
The rated production speed of the production line is 3m/min, 3000 square meters panel materials with a thickness range of 20mm to 50mm can be produced in 12 hours working time for each working shift.
Parts listing:
| No. | Component | Quantity |
| 1 | De-coiler | 2set |
| 2 | Embossing rolling machine | 1set |
| 3 | Roll forming machine | 1set |
| 4 | Phenolic injecting machine | 1set |
| 5 | Double belt laminating machine | 1set |
| 7 | Auto cutting machine | 1set |
| 8 | Run out table | 2set |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.