Slight Matte Surface 0.3RA 0.8mm Laminated Steel Plate
Slight Matte Surface 0.3RA 0.8mm Laminated Steel Plate For Plastic Card Sheet Laminating
1. Introduction of Slight Matte Surface 0.3RA 0.8mm Laminated Steel Plate For Plastic Card Sheet Laminating
They are applied as the consumables in plastic card lamination. It can well ensure perfect plastic card surface finish after lamination. Our plates are being widely used by many card factories in both China and foreign countries worldwide.
Technical Parameters:
Plate size(L×W): A4, A3 or custom-made size
Plate thickness: 0.6mm, 0.8mm (Thickness tolerance: ±0.05mm)
Dimension tolerance: ±1mm for length and width.
Plate flatness level: maximum 1 mm.m
Surface roughness value range: 0.3-1.5um
Slight Matte plate (Ra0.3μm-0.5um)
Heavy Matte plate (Ra1.3-1.5um)
Glossy plate surface glossiness: over 800 GU at 20° (both sides)
Surface hardness: HRC80±20
Thermal transmission: 0.04cal/℃.cm.sec at 20℃
Packaging box: solid plywood carton with soft cushion protection inside.
2. Description of Slight Matte Surface 0.3RA 0.8mm Laminated Steel Plate For Plastic Card Sheet Laminating
Steel plate based in good raw material, use the advantage of good conducting of heat, resisting pressure, high quality mirror. By our steel plates you can produce the international standard card.
Parameters:
| Thickness range | 0.8 mm (Thickness tolerance: ±0.05mm) |
| Dimension tolerance | ±1mm |
| Plate size(L×W) | A4, A3 or custom-made size |
| Plate flatness level | maximum 1 mm |
| Surface pattern | special pattern |
| Surface hardness | HRC80±20 |
| Thermal transmission | 0.04cal/℃.cm.sec at 20℃ |
| Edge state | smooth and deburred with the round curved corners |
| Packaging box | solid plywood carton with soft cushion protection inside. |
3. More Features of Slight Matte Surface 0.3RA 0.8mm Laminated Steel Plate For Plastic Card Sheet Laminating
Detailed Product Description:
1). Glossy finish, matte finish, mirror finish,etc.
2). Size & thickness on request
3). High-grade stainless steel
Features:
1). Card laminator Accessories
2). 800 Micron thickness
3). Characteristic: heat-resistant, high elasticity
| surface roughtness Ra value | 0.3-0.5μm |
| Thickness range | 600 or 800 micron |
| Dimension tolerance | ±1mm for length and width |
| Edge state |
smooth and deburred with the round curved corners |
4. Packing of Slight Matte Surface 0.3RA 0.8mm Laminated Steel Plate For Plastic Card Sheet Laminating
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.