Four In One Family UDM Access Point 26W Power Consumption
UBNT UniFi UDM four-in-one family bucket AP/router/switch/controller
System Requirement
Either of the following is required:
-
iOS or Android™ Mobile Device with UniFi Network App Installed
-
Web Browser: Google Chrome (Other browsers may have limited functionality)
|
1.System LED |
|
|---|---|
|
White |
Device is ready to be configured |
|
Flashing White |
Device is booting up Device is initializing/deinitializing |
|
Heartbeat White |
Firmware update in process |
|
Blue |
Device is configured and ready |
|
Slow Flashing Blue |
Client connected to device via Bluetooth (BLE) |
|
Flashing Off/White/Blue |
Device is in recovery mode. The LED will cycle through a pattern at one-second intervals, between off, white, and blue. |
|
2.LAN (Ports 1-4) |
|
|
RJ45 switch ports support 10/100/1000 Ethernet connections for the LAN (Local Area Network). By default, they are set to DHCP Server with the fallback IP address, 192.168.1.1/24. |
|
|
3.Internet Port |
|
|
The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client by default. |
|
|
4.Power Port |
|
|
Connect the included AC Power Cord. |
|
|
5.Reset Button |
|
|
Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the System LED becomes solidly lit light blue. After a few seconds, the LED will turn off, and the device will automatically reboot. |
|
Use Category 5 (or above) UTP cabling approved for indoor use.
Specifications
|
UDM |
|
|
Dimensions |
ø110 x184.2 mm (ø4.33 x 7.25") |
|---|---|
|
Weight |
1.05 kg (2.32 lb) |
|
Networking Interfaces |
(4) 10/100/1000 RJ45 Ports |
|
Max. Power Consumption |
26W |
|
Power Method |
AC Power Cord |
|
Power Supply |
Internal AC/DC Power Adapter, |
|
Supported Voltage Range |
100 - 240VAC |
|
LED |
System Status |
|
Operating Frequency |
2.4 GHz 5 GHz |
|
Max. TX Power |
|
|
2.4 GHz |
23 dBm |
|
5 GHz |
30 dBm |
|
Antenna |
(1) Dual-Band, Quad-Polarity Antenna |
|
Antenna Gain |
|
|
2.4 GHz |
3 dBi |
|
5 GHz |
4.5 dBi |
|
Wi-Fi Standards |
802.11 a/b/g/n/ac/ac-wave2 |
|
Wireless Security |
WEP, WPA-PSK, |
|
Operating Temperature |
-10 to 45° C (14 to 113° F) |
|
Operating Humidity |
5 to 95% Noncondensing |
|
Certifications |
CE, FCC, IC |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.