125mph Remote Link Powerful Communication Antenna 26 DBi Gain
UBNT AF-3G26-S45 Outdoor remote link powerful communication antenna
Installation Requirements
-
-
airFiber 3X radio (sold separately)
-
Phillips screwdriver
-
16 mm wrench
-
24 mm wrench
-
Clear view of the sky for proper GPS operation
-
Mounting point:
-
At least 1 m below the highest point on the structure
-
For tower installations, at least 3 m below the top of the tower
-
-
Ground wire – min. 10 AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground the airFiber radio to a grounded mast, pole, tower, or grounding bar.
-
|
|
WARNING: Failure to properly ground your airFiber radio will void your warranty. |
|---|
-
Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.
-
Specifications
|
AF-3G26-S45 |
|
|
Dimensions |
650 x 650 x 300 mm (25.6 x 25.6 x 11.8") |
|---|---|
|
Weight |
9.8 kg (21.61 lb) |
|
Frequency |
3.3 - 3.8 GHz |
|
Gain |
26 dBi |
|
HPOL Beamwidth |
7° (6 dB) |
|
VPOL Beamwidth |
7° (6 dB) |
|
Front-to-Back Ratio |
-33 dB |
|
Max. VSWR |
1.4:1 |
|
Wind Survivability |
200 km/h (125 mph) |
|
Wind Loading |
787 N @ 200 km/h (177 lbf @ 125 mph) |
|
Polarization |
Dual Linear |
|
Cross-Pol Isolation |
35 dB Min. |
|
ETSI Specification |
EN 302 326 DN2 |
|
Mounting |
Universal Pole Mount, airFiber Radio Mount, and Weatherproof RF Jumpers Included |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.