HuaWei MA5800 MA5800X2 GPON OLT Board GPSF Interface Board
HuaWei MA5800 MA5800X2 GPON OLT Board GPSF Interface Board
HuaWei MA5800 MA5800X2 GPON OLT board GPSF Interface Board fully equipped with 16-port module
Overviews of GPSF
GPSF is a 16 port GPON interface card of Huawei NG OLT, provides GPON service access from ONT. GPSF can maximum access 16*128 GPON subscribers.
* Huawei 16-GPON Port Interface Card with B+ SFP module
* Apply to Huawei MA5800 X2, X7, X15, X17 NG OLT system
* Support split ration 1:64
* Transmit Speed: 2.49Gbit/s, Receive Speed: 1.24Gbit/s
* Interface Type: SC/PC
* Max Transmit Distance: 20KM
* Transmit Wavelength: 1490nm, Receive Wavelength: 1310nm
* Standards Compliance: ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.4
* B+ SFP Module Optical Power: 1.5 dBm~5 dBm, Receiver Sensitivity: -28 dBm
Tech Specs of GPSF
|
|
|
|
Specification |
|
|
Service ports |
|
|
GPON Port |
16-GPON Port |
|
GPON SFP Module Specification |
|
|
Type |
B+ Module : One-fiber bi-directional optical module, class B+ |
|
Operating Wavelength |
Tx: 1490 nm, Rx: 1310 nm |
|
Encapsulation Type |
SFP |
|
Port Rate |
Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s |
|
Minimun Output Optical Power |
B+ Module : 1.50 dBm |
|
Maximum Output Optical Power |
B+ Module : 5.00 dBm |
|
Maximum Receiver Sensitivity |
B+ Module : -28.00 dBm |
|
Optical Connector Type |
SC/PC |
|
Optical Fiber Type |
Single-mode |
|
Reach |
20.00 km |
|
Overload Optical Power |
B+ Module : -8.0 dBm |
|
Extinction Ratio |
8.2 dB |
|
Device Specifications |
|
|
Dimensions (W x D x H) |
23.30 mm * 257.90 mm * 399.20 mm |
|
Power Consumption and Maximum Frame Size |
|
|
Power Consumption |
Static: 25W; Maximum:50W |
|
Maximum Frame Size |
2004 bytes |
|
Operating temperature |
-40°C to +65°C |
Q&A
Q: What's the difference among H901GPHF, H901GPSF, H805GPFD?
A:
|
|
H901GPHF |
H901GPSF |
H805GPFD |
|
Port |
16 GPON ports with SFP optical modules |
16 GPON ports with SFP optical modules |
16 GPON ports with SFP optical modules |
|
Max. split radio |
Class B+: 1:64 |
Class B+: 1:64 |
Class B+: 1:64 |
|
Function |
|||
|
Forwarding capability |
40 Gbit/s |
40 Gbit/s |
40 Gbit/s |
|
T-CONTs per PON port |
1024 |
1024 |
1K |
|
Service flows per PON board |
16384 |
16384 |
16K |
|
Maximum frame size |
2004 bytes |
2004 bytes |
2004 bytes |
|
Maximum number of MAC addresses |
131072 |
16384 |
64K |
|
Maximum distance difference between two ONUs under the same PON port |
40 km |
40 km |
40 km from V800R013 |
|
FEC |
Bidirection |
Bidirection |
Bidirection |
|
CAR group |
Supported |
Supported |
Supported |
|
Queue scheduling hierarchy |
4-level HQoS |
2-hierarchical HQoS |
4-level HQoS |
|
IPv6 |
|
|
Supported |
|
Variable-length OMCI |
Supported |
Supported |
Supported from V800R013 |
|
ONU-based shaping or queue-based shaping |
Supported |
Supported |
Supported |
|
Load sharing |
Supported |
Supported |
Supported |
|
High-precision clock time synchronization |
|
|
Supported |
|
Type B protection (dual-homing) |
Supported |
Not supported |
|
|
Type B Protection (single-homing)/ Type C |
Supported |
Supported |
|
|
Type B/Type C protection |
|
|
Supported |
|
1588v2 |
Supported |
Not supported |
|
|
Rogue ONU detection and isolation |
Supported |
Supported |
Supported |
|
Automatic shutdown at high temperature |
Supported |
Supported |
Supported |
|
Automatic shutdown of an idle port |
Supported |
Supported |
Supported |
|
D-CCAP networking |
Supported |
Supported |
|
|
1:64 eOTDR |
Supported (with FBG) |
Supported (with FBG) |
Supported |
|
Environment |
|||
|
Operating temperature |
-40°C to +65°C |
-40°C to +65°C |
-25°C to +65°C |
|
Power consumption |
Static: 25 W |
Static: 25 W |
Static: 26 W |
Q: When deploying GPON network, what are the differences between GPSF and GPHF?
A: GPSF only can supports FTTH, while GPHF supports FTTH, FTTO, FTTM and D-CCAP.
Our products are of superior quality and reasonable prices. If you have any questions, please contact us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.