Quick Deliver Bus Spray Booth With CE Certificate Good Air Capacity
Quick deliver bus spray booth with CE certificate good air capacity
Maint Specification :
The follow specification just one standard size for reference.
|
Inner dimension |
15000×5000×5000mm(L×W×H). |
|
external dimension
|
15144×6896×5600mm(L×W×H). |
| basement | 2 basements.single one size:13000×840 mm(L×W) |
| front door | Side opening door,4 doors,4000×4500 mm(W×H),color:white |
| operation door | 2 doors,700×2000mm(W×H),color:white |
| wall | 3 Steel reinforcements in the wallboard,3 Steel composite beams in roof.wallboard thickness:70mm,width:1150mm,filled with EPS.two color plate:0.476mm,color:white |
| lamps | Top lamps:18*4=72,36w.bottom lamps:14*4=56,36w,(left/6,right/6,back/2) |
| structure | Air-in from the roof,Square pipe steel framework |
|
Air-in blower:4 Double inlet air centrifugal fans.technical parameters of each one:model:YDW5.6M,power:5.5KW,capacity:15000m3/h. Air-out blower:2 Double inlet air centrifugal fans,technical parameters of each one:model:DKF,power:11KW,capacity:36000m3/h.belt drive |
|
| heating system | 2 Riello G20 burners,2 sets of stainless steel heat exchanger,2 electric throttle perform spray paint cycle.maximum calorific value:400000Kcal/h. |
|
filtration system
|
Primary filter, advanced filtering, glass cotton filter,M type activated carbon filter and single-layer flat drive fiber glass filter. |
| roof | Galvanized sheet bending roof |
| control system | Spray paint,lacquer that bake of temperature, drying time setting, lighting switch, failure indicator, temperature controller. The power switch, stop switch. With temperature limiter. |
|
voltage frequency
|
1×220 3×380 50HZ |
| maximum working temperature | 80℃ |
| wind speed | ≥0.25m/s |
| total power | 49KW |
Product Application
We offer different kind of big spray booth according to customed requrie.The follow project is for Yotong Bus in Pakistan.
Fan on top and full down draft Paint booth system.
----------------------------------------FAQs-----------------------------------------
How can we cooperation?
How can we cooperation?
1. Turn Key Project:
Our company will be responsible to help you to do the production line desing,manufacturing,installation,
debugging and your personnel trainging jobs,Also we will provide you one-stop service for your
production facilities procurement.
2. Equipment Supply:
Our company will not only provide you the equipments,but also will offer you the onsite installation
instruction and guidance as well.
How about after sale serivce?
1. Provide technical support and production line upgrade
2. Feedback withini 12h after receive fault notification or service requirement
3. Free training on the user’s manual
4. User-friendly English manual or operation video for machine using and maintanence.
5. On-the spot trainging and installation can be met if required.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.