HT 98x10mm 37% Translucent Zirconia Blocks For Dental Lab
High Strength CADCAM Blanks High Translucent Zirconia Miling Zirconium Blocks
Features of Honchon zirconia High translucent Zirconia
YUCERA HT (high translucent) can be used for coping crown and framework. The following instructions provide general guidelines for designing, milling, coloring, sintering, porcelaining and glazing and should be followed very carefully to avoid any loss of aesthetics, fit, durability or overall quality.
YUCERA Technology Co.,Ltd believes in our business and we hope we ‘ve made an impact on yours. OEM is ok for us.
Behind every bright smile is Honchon smile.
Our service
1,Yucera establish cooperation with many large denture processing center and oral hospitals, get outstanding performance in the field and earn good reputation amount technicians and patients.
2, We have already passed the CE and ISO certification.
I’m sure that our factory is good enough for your program in your market.
Welcome any comments.
Physical characteristics
| Properties | HT |
| Density before sintering(g.cm-3) | 3.10-3.20 |
| Density after sintering(g.cm-3) | 6.08-6.10 |
| CTE(25-500℃)(K-1) | 10.5 |
| Flexural strength after sintering(Mpa) | 1350 |
| Accelerated aging surface monoclinic phase content | ＜15% |
| Light transmittance | 37% |
| Chemical solubility after sintering(μg.cm-2) | ＜100 |
| Cytotoxicity | 0 Level |
| Radioactivity(Bq.g-1) | ＜0.1 |
| Sintering temperature(℃) | 1500-1550 |
Chemical composition
| Components | HT |
| ZrO2+HfO2+Y2O3 | ≥99% |
| Y2O3 | 4.5%-6.0% |
| Al2O3 | ＜0.25% |
| Other Oxides | ＜0.15 |
Advantages
- monolithics or full contour crown/ bridges.
- good translucency rate 43%.Strength 1200MPA,
- Large stock,withine 3 days shippment out
- welcome to do OEM for yours
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.