Armored 96 Core Single Mode Direct Buried GYTS Optic Fiber Cable
GYTS Armored 96 Core Single Mode Fiber Optic Cable Direct Buried
Description:
The fibers,250um,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a waterresistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with the filling compound to protect it from water ingress, the cable is completed with the HDPE sheath.
Characteristics:
- Good mechanical and temperature performance
- High strength loose tube that is hydrolysis resistant
- Special tube filling compound ensure a critical protection of fiber
- Specially designed compact structure is good at preventing loose tubes from shrinking
- PE sheath protects cable from ultraviolet radiation
Cable Mechanical characteristic:
| Cable type | Diameter(mm) | Weight (kg/km) |
Tensile strength Long/short term (N) |
Bending radius Dynamic/static (mm) |
Storage temperature ( ℃ ) |
| GYTS-2~60 | 9.5 | 105 | 600/1500 | 20D/10D | -20~+70 |
| GYTS-62~72 | 10.5 | 130 | 600/1500 | 20D/10D | -20~+70 |
| GYTS-74~96 | 12.0 | 160 | 600/1500 | 20D/10D | -20~+70 |
| GYTS-98~120 | 14.0 | 220 | 600/1500 | 20D/10D | -20~+70 |
| GYTS-122~144 | 16.0 | 280 | 600/1500 | 20D/10D | -20~+70 |
| GYTS-146~288 | 20.0 | 340 | 600/1500 | 20D/10D | -20~+70 |
Feature:
- Steel wire used as the central strength member
- Loose tube filling compound
- 100% cable core filling
- PSP enhancing moisture-proof
Application:
- Adopted to outdoor distribution
- Suitable for aerial, pipeline laying method
- Long distance and local area network communication
Main mechanical & environmental performance test:
| Item | Test Method | Acceptance Condition |
| Tensile Strength IEC 794-1-2-E1 |
- Load: Short term tension - Length of cable: about 50m |
- Fiber strain £ 0.15% - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage |
| Crush Test IEC 60794-1-2-E3 |
- Load: Short term crush - Load time: 1min |
- Loss change £ 0.05dB@1550nm - No fiber break and no sheath damage. |
| Impact Test IEC 60794-1-2-E4 |
- Points of impact: 3 - Times of per point: 1 - Impact energy: 5J |
- Loss change £ 0.1dB@1550nm - No fiber break and no sheath damage |
| Temperature Cycling Test YD/T901-2001-4.4.4.1 |
- Temperature step: +20℃→-40℃→+70℃ →+20℃ - Time per each step: 12 hrs - Number of cycle: 2 |
- Loss change £ 0.05 dB/km@1550 nm - No fiber break and no sheath damage. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.