SMD 100 Watt Roadway LED Lighting Motion Sensor Solar Street Light
Manufacturers 100 watts led street light 1000 watt motion sensor led solar street light led streetlight
| GY5620LD | GY6525LD | GY7330LD | |
| Nominal Power | 30W-80W | 100W-150W | 180W-250W |
| Input Voltage | 100-277VAC,50/60Hz | ||
| Power Factor | >0.95 | ||
| THD | <19% | ||
| Light Distribution | II,III, IV | ||
| CCT | 2700K~6500K | ||
| CRI | Ra>70 | ||
| Dimensions | 566*205*110mm | 658*251*112mm | 731*301*114mm |
| Protection Grade | IP66, IK09 | ||
| LED | Lumileds 3030 or 5050 | ||
| Electrical Protection | CLASS I | ||
| Luminous Flux | 130~140Lm/W (3030 LED) 150~165Lm/W (5050 LED) | ||
| Package Size | 596*225*130mm | 688*271*132mm | 761*321*134mm |
| Housing | Die-casting Aluminum | ||
| Warranty | 5 Years | ||
For this reason, correlated color temperature (CCT)-based illumination gives a significant lighting performance both in terms of energy efficiency and in overcoming traffic accidents in low visibility areas.
High Lumen ＞130lm/w SMD LED
Good Heat Dispassion Die Casting Aluminum Housing
60mm diameter street light pole connector
Integrating sphere test
IP65 Waterproof test
AC85-265V Voltage test
Apply in highway, expressway, primary road, subordinate road, and some other roads, along with square, sports ground, parking lot, etc.
Attention before installation:
· Please carefully read the operating instructions before using the products.
· Please check if the power supply meets the requirements. The input voltage of products is AC 85-300V
Please cut off the power supply before installation
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.