Dual Phase Steel Pipe Fittings Elbow Special Material Pipe Fittings

In the pipeline system, the elbow is a pipe fitting that changes the direction of the pipeline. According to the angle, there are three most commonly used ones: 45° and 90°180°. In addition, it also includes other abnormal angle elbows such as 60° according to engineering needs. The elbow materials are cast iron, stainless steel, alloy steel, malleable cast iron, carbon steel, non-ferrous metals and plastics.

Introduction

The elbow is a commonly used connection pipe fitting in plumbing installation, used for the connection of the pipe bend, and used to change the direction of the pipe.

Other names: 90° elbow, right angle bend, love bend, stamping elbow, pressed elbow, machine elbow, welding elbow, etc.

Purpose: To connect two pipes with the same or different nominal diameters, so that the pipeline can be turned at 90°, 45°, 180° and various degrees.

A bending radius less than or equal to 1.5 times the pipe diameter belongs to an elbow, and more than 1.5 times the pipe diameter belongs to an elbow.

Product Usage

A commonly used connection pipe fitting in pipeline installation, connecting two pipes with the same or different nominal diameters to make the pipeline bend at a certain angle, with a nominal pressure of 1-1.6Mpa.