Original JYQD-YL02D 12-36V Dual Driver for Hall Sensor BLDC Motor

12-36V DC JYQD-YL02D (updated version of JYQD-YL02C) brushless motor controller for wheelchair, hub motor, electric scooter, electric skateboard

!!! Please choose the right version you want when you place an order to us!!!!

!!!JYQD-YL02C is the old version of JYQD-YL02D, the newest version is JYQD-YL02D!!!

It has four versions for your choice, please let us know which version you want.

JYQD-YL02D(8559) direct start version has NO LOCK function,(linear speed regulation 0-5V,liner brake:0-5V)

JYQD-YL02D(457E) direct start version has NO LOCK function,(linear speed regulation 0-2.5V,liner brake:0-2.5V)

JYQD-YL-02D(99F2)safety start version has LOCK function.(linear speed regulation 0-5V,liner brake:0-5V)

JYQD-YL-02D(C737)safety start version has LOCK function.(linear speed regulation 0-2.5V,liner brake:0-2.5V)

Safety start: if you use a knob~style potentiometer to adjust the speed, if the potentiometer not rest to 0 before stop, the motor will direct start according

Model number :JYQD-YL02D

Operating temp.: -20—85℃

Operating voltage: 12-36VDC

Cont. working current: 15A

PWM speed control PWM frequency:1K-10KHZ; Duty cycle 0-100%

Analog voltage speed regulation :0-5V

Speed pulse signal output :YES

Dual-motor drive mode: 540W each

Features

Can drive two motor at same time, can be single or double controlled.

has Reactive power brake function, Brake reverse charging protection release circuit, can be MCU controlled,

The "5V" port on the board can offer 300mA current to external MCU

Important reminder

1:Different Hall effect sensored BLDC motor has different Hall wires sequence, please do well-match before onload drive.

2: Add heatsink if the power more than 100W and keep good heat dissipation conditions for the board.

Wiring

MA---motor phase

MA---motor phase

MA---motor phase

P+ ---DC+

P- ---- DC-

HA---Hall sensor

HA---Hall sensor

HA---Hall sensor

5V---Hall sensor 5V

GND---Hall sensor GND

GND: Only for control signal

VR: Speed regulation,(0-2.5V or 0-5V linear speed regulation).PWM frequency:1K-5KHz.

ZF: Forward and backward control(5V high level or 0V low level, if you use 3.3V MCU, you need do adjustment to 5V)

M:speed pulse signal output

EL: brake function, 0-2.5V or 0-5V linear brake

5V:5V power source for external control device(≤300mA)

Overall size