JX Series Metering Centrifugal Slurry Pump Plunger Type
Price:
Negotiable
MOQ:
1 Set
Delivery Time:
6-8 weeks
Brand:
HL
Product Description
JX Series Plunger-Type Metering Pump, Centrifugal Pump
Main Performance Parameters
- Max flow rate: 940L/h
- Max discharge pressure: 50Mpa
- Turndown ratio 10:1, steady-state accuracy ± 1%
- Max suction lift: 2.5m water column
- Medium temperature: -10℃--100℃
- The highest ambient temperature: +40C, the highest elevation: 1000m
Major Features
- Hard and compact design, small pump head, and optimized connection.
- Plunder contacts medium directly with high volumetric efficiency. The transmission loss is lower at high pressure.
- Variable eccentric structural adjustment ensures smooth fluctuations in flow pulsation; new machine enables the result more accurate and reasonable.
- It is suitable for conveying non-solid particles media, high viscosity media, in high pressure environment; It is not recommended for corrosive pulp and flammable, explosive, dangerous chemicals!
- Adopt graphite fiber with superior sealing performance and long service life.
Control Mode
- Power supply: 380V/220V-50Hz/60Hz/three-phase/single-phase
- Variable frequency controller receives the external control signal and adjusts the stroke speed, input signal: 4-20 mA analog signal
- Motor controller determines three-phase motor by "on/off" mode, adjusts the output flow
Main Applications
It is widely used infields such as chemical, petrochemical, electricity and metallurgy etc.In particular,it is very popular in fields with high viscosity, high pressure and high temperature.
Main Components of the Fluid End
| Fluid End | Pump Head | Valve body,valve seat | Valve ball | Plunger | Tamping | Seal ring |
|---|---|---|---|---|---|---|
| 304SS | 304SS | 304SS | 304SS/Zirconia | 304+Ceramic | Fluororubber | Fluororubber/PTFE |
| 316SS | 316SS | 316SS | 304SS/Zirconia | 316+Ceramis | Fluororubber | Fluororubber/PTFE |
Flow/Pressure
| Code | Max flow (L/h) |
Max pressure (Mpa) | Plunger diamater (mm) |
Stroke frequency (min-1) |
Stroke length (mm) |
Motor power (kW) |
|---|---|---|---|---|---|---|
| JX940/0.9 JX940/0.7 JX940/0.5 |
940 | 0.9 0.7 0.5 |
90 | 130 | 20 | 1.5 1.1 0.75 |
| JX840/1.1 JX840/0.8 JX840/0.5 | 840 | 1.1 0.8 0.5 |
85 | 1.5 1.1 0.75 |
||
| JX740/1.2 JX740/0.9 JX740/0.6 |
740 | 1.2 0.9 0.6 |
80.0 | 1.5 1.1 0.75 |
||
| JX650/1.4 JX650/1.0 JX650/0.7 | 650 | 1.4 1.0 0.7 |
75 | 1.5 1.1 0.75 |
||
| JX570/1.6 JX570/1.1 JX570/0.8 |
570 | 1.6 1.1 0.8 |
70.0 | 1.5 1.1 0.75 |
||
| JX490/1.8 JX490/1.3 JX490/0.9 |
490 | 1.8 1.3 0.9 |
65 | 1.5 1.1 0.75 |
||
| JX410/2.1 JX410/1.6 JX410/1.1 | 410 | 2.1 1.6 1.1 |
60 | 1.5 1.1 0.75 |
||
| JX360/2.4 JX360/1.8 JX360/1.2 | 360 | 2.4 1.8 1.2 |
56 | 1.5 1.1 0.75 |
||
| JX280/3.1 JX280/2.2 JX280/1.5 | 280 | 3.1 2.2 1.5 |
50 | 1.5 1.1 0.75 |
||
| JX230/3.8 JX230/2.8 JX230/1.9 | 230 | 3.8 2.0 1.9 |
45 | 1.5 1.1 0.75 |
||
| JX180/4.8 JX180/3.5 JX180/2.4 | 180 | 4.8 3.5 2.4 |
40 | 1.5 1.1 0.75 |
||
| JX140/6.2 JX140/4.6 JX140/3.1 |
140 | 6.2 4.6 3.1 |
35.0 | 1.5 1.1 0.75 |
||
| JX100/8.5 JX100/6.2 JX100/4.2 |
100 | 8.5 6.2 4.2 |
30 | 1.5 1.1 0.75 |
||
| JX70/12.0 JX70/8.8 JX70/6.0 |
70 | 12.0 8.8 6.0 |
25 | 1.5 1.1 0.75 |
||
| JX55/15.8 JX55/11.7 JX55/8.0 |
55 | 15.8 11.7 8.0 |
22 | 1.5 1.1 0.75 |
||
| JX45/19.0 JX45/13.9 JX45/9.5 | 45 | 19.0 13.9 9.5 |
20 | 1.5 1.1 0.75 |
||
| JX35/23.5 JX35/17.0 JX35/12.0 | 35 | 23.5 17.0 12.0 |
18 | 1.5 1.1 0.75 |
||
| JX25/34.0 JX25/25.0 JX25/17.0 | 25 | 34.0 25.0 17.0 |
15 | 1.5 1.1 0.75 |
||
| JX15/50.0 JX15/36.0 JX15/25.0 | 15 | 50.0 36.0 25.0 |
12 | 1.5 1.1 0.75 |
||
| JX10/50.0 JX10/36.0 JX10/25.0 |
10 | 50.0 36.0 25.0 |
10 | 1.5 1.1 0.75 |
||
Fluid End
| Code | Material |
| S | 304SS |
| L | 316SS |
Interface
| Code | Description | JX10-70 | JX100-410 | JX490-940 |
|---|---|---|---|---|
| P | NPT thread | 1/2''M | 1/2''F | 1''M |
| F | Flange interface | DN15 | DN20 | DN25 |
| K | Tube fittings | DN15 | ---- | ---- |
| X | Special interface | Please consult Hanlin Industrial | ||
Note: the red parameters are standard configuration.
Electric Motor
| Code | Description |
|---|---|
| 1 | Three-phase motor 220/380V, 50Hz,1440rpm, IP55/F |
| 2 | Single-phase motor 220V, 50Hz, 1440rpm, IP55/F |
| 3 | Three-phase explosion-proof motor 380V, 50Hz, 1440rpm, d IP55/F, dHBT4 |
| 4 | Variable-frequency three-phase motor 220/380V, 50Hz, 4, 1440rpm, IP55/F, IC416 |
| 5 | The motor is not provided with the pump, Retain the IEC interface |
| 6 | Consult Hanlin Indastrial for other motors |
When selectingthe variable-frequency motor, its power should be at greater level.
JX Series Dimensions
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hanlin Industrial Machinery Co., Ltd
Location
617,618,3F,Ever Grande International Plaza,745 Qutang Road,Changsha 410007,Hunan,China
Contact Person
Heather