Static eliminator bar Electrostatic control in film rewinding process
 
problem

Film extrusion or film blowing lines usually have very high static electricity exceeding 200kV, which can cause the following problems:
Operators suffer from electric shock, causing discomfort
High static film sound production of film roll
Attract dust more than one meter away and pollute the finished product

Solution
The selection of equipment depends on the design of the machine, space constraints, etc. Qp-es electrostatic rod can blow the air stream with ions to the product surface. After the ion wind is blown out of the fan, an ionosphere with a width covering the full length of the product and a depth reaching the reel is formed in a certain area to effectively neutralize the static electricity in the area. At the same time, a fan filter device can be provided to ensure the cleanness of the blown air.
 
Features:
 
1, Prevent electric shock design,use of safe；
2, High strength alloy material with fine appearance；
3, Excellent destatic performance, widely applicable scope;
4, Using special technology to isolate the electrode, the electrostatic performance is better.
 
Performance Parameters:

Application field:

Electronic
Photoelectric
Printing
Plastic
Textile and other industries

Use and installation
 

(1) Choose an optimal position and fix the ion bar and adaptor tightly.

(2) Connect two ends of power cable with adaptor and ion bar.

(3) Connect the ground end on the bar body to the ground bolt on the power

(4) Switch on the power and set proper parameters.

Shanghai qipu electrostatic technology co., LTD is located in D5 NO.508 Dongye Road Dongjing Songjiang Shanghai, is a set of static control equipment & corona treatment machine research and development, manufacturing, sales and service in one of the high-tech enterprises. The product of the company's main research and development is: electrostatic eliminator bar,corona treater, ion air bar, high voltage generator, ionizing air blower,static field meter ,static sensor,Electrostatic electret equipment and so on.

FAQs

Q: Are you trading company or manufacturer?
A: Yes, we are factory, all machine is made by ourselves and we can provide customize service according to your requirement. We have production line, R&D department, QC department, sales and after-sales service department and so on.
Q: How long is your delivery time?
A: Generally, it is 1-3 day if the goods are in stock. And it is about 3 to 7 days if the goods are not in stock, it depends on your quantity requirement.
Q: Is this machine easy to use and if we have no experience to use it, can we operate it well?
A: Yes, our machine is intended to designed easier operation for you. We can provide machine videos or pictures to you; it can help us how to operate it well.