ISO Approve 0.0125mm Thick Polyimide Thin Film Insulation Film Transparent
Supply 0.0125mm Thick CPI Insulation Film Transparent Kapton Polyimide Film High Temperature
Transparent polyimide film is mainly used in mobile phone circuit board, with light transmittance up to 90%, high and low temperature resistance, light transmittance, flexibility and other properties. FPC, mobile phones, 5g, electronic components, automotive and other electronic and electrical industries.
Polyimide film specifications (thickness) are: 0.0125 mm, 0.015 mm, 0.025 mm, 0.05 mm, width 520 mm, 1040 mm, can be cut according to the width.
Transparent polyimide film is a kind of Bi-Oritened transparent film. The film not only has the excellent properties of normal polyimide film but also with good transparent and heat shrinkage.
Performance index:
| Property Name | Unit |
3
NC type Polyimide Film |
||
| Appearance | Transparent Film with smooth and flat surface and without obvious bubbles, defect and impurities. |
|||
| Normal Thickness | um | 25 | 18 | |
| Thickness Tolerance ≤ | um | ±2 | ±2 | |
| Width | mm | 520 | 520 | |
| Length | m | 1500 | 1500 | |
| Tensile Strength MD&TD ≥ | Mpa | 100 | 100 | |
| Elongation at rupture MD&TD ≥ |
% | 20 | 20 | |
| Area | ㎡ /kg | 26 | 36 | |
| Heat Shrinkage (150 ℃ ,30min ) ≤ |
% | 0.15 | 0.15 | |
| Surface Tension (A / B side ) ≥ |
Dyne | 46 | 46 | |
| Dielectric Strength (48HZ ～62HZ )MD&TD ≥ |
Kv/mm | 200 | 200 | |
| Flame Grade | V-0 | V-0 | ||
| Color value |
L* | 89±2 | 89±2 | |
| a* | 0.15 ± 0.05 | 0.20 ± 0.05 | ||
| B* | 0.55 ± 0.05 | 0.17 ± 0.05 | ||
Anhui Film company fully respond to the national strategic goal of rejuvenating the country through science and technology, and has always been guided by the principle of "honesty first, customer first", striving to become a world-class top brand enterprise.
Production Line show:
Inspection Lab show:
Development process:
-
Receipt of customer’s RFQ ( detailed requirements of the glass or touch panel, qty etc.)
- Receive customer's technical files, including CAD drawing,application ect .
- Recommend standard products or customize products based on customer's requirements.
- Send quotation to customers.
- Offer engineering drawing for confirmation and fill in project kick-off form.
- Make samples according to the confirmed drawing.
- Send the samples to customers for confirmation. Offer all after sevice supports.
- Pilot production.
- Mass production
Why Choose Us- Our Advantages:
-
11 years experience in designing and manufacturing on cover glass,touch panel, G+G / G+F+F are
available. -
A strong research team for products and provide good pre-sales and after-sales service.
-
Except some standard products, customized glass and touch panel from 1” to 100” now, more
bigger size is been developing and researching. -
Own industrial parks, good guarantee for product quality and lead time.
- Physically tempered cover glass, support a ball of 500g falling on the center from 1.3m height.
- Enhanced durability and reliability
- Water proof, anti-explosion possible.
- Professional facilities and excellent design
- Optimized production capacity
- Optimized production yield rate.
Products Application:
Factory Automation
Industrial Control
Medical Equipment
Retail Kiosks
Auto Industry
POS terminals
Financial - ATM & Bill Pay Kiosks
Etc..
Lead time:
- For goods in stock, 2-3 days after PO.
- For customized samples, 1weeks after the confirmation of price and drawing.
- For mass production, 3-4 weeks after PO.
Shipment service:
FedEx, SF etc.
Packing Method show:
Appearance:
The surface of the film is smooth and smooth, without wrinkles, tears, particles, bubbles, pinholes, foreign impurities and other defects, and the edge is neat without damage.
Matters needing attention:
1. The film shall be rolled in the tube core, and each roll shall be packed and sealed with plastic bags and placed in a dry and clean box.
2. The film should be stored in a dry and clean room.
3. During transportation and storage, avoid moisture and mechanical damage.
Q&A
Q. Are you a trading company or manufacturer?
A: We are a manufacturer.
Q: What do I need to offer to get a quote ?
A: Please offer 2D or 3D drawings (material, dimension, tolerance, surface treatment and other technical requirement etc.) ,quantity, application or sample.Then we will quote the best price within 24hours.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample.After price confirmation, you can require for samples to check our quality.
Q. What’s your lead time?
A: The lead time for samples is 2weeks and mass production is 3-4weeks.
Q. What kind of products can you provide?
A: We can provide cover glass, touch panel, electromagnetism screen, integrated touch machine, touch module, smart window, harden film, conductive film ect..
Q: How long is your delivery time?
A: Generally it is 5-10 working days if the materials are in stock. or it is 10-15 working days if materials are not in stock, it is according to quantity.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.