Hot Dipped Galvanized Spiral Wire Mesh , Rockfall Wire Rope Mesh Netting
hot dipped galvanized spider spiral rope mesh for rockfall neeting system introduction
The hot dipped galvanized spider spiral rope mesh for rockfall neeting system made by high tensile 3 mm steel wire, which is the mainly component of the SPIDER System. SPIDER net with a layer of grid net stabilizes large areas of rock with anchors and boundary ropes. Unstable rocks are wrapped with a layer of spiral net and a layer of grid net and anchored all around with boundary ropes.
hot dipped galvanized spider spiral rope mesh for rockfall neeting system specification:
SPIDER spiral rope net: Rope wire structure:3*3mm,
Hole Inscribed circle diameter: 250mm (+/- 5%)
Roll size: 3.5m x 5/10m
Grid net:: Wire diameter: 2.0mm or 2.2mm
Hole size: 50mm*50mm
Roll size: 2m*20m
Anchors: Deformed steel bar anchor diameter: 25mm or 28mm
Length:2m -5m
Anchor bearing plate: 320mm x 170/180mm
Rope: Border rope diameter: 12mm or 16mm
Seaming rope diameter: 8mm
hot dipped galvanized spider spiral rope mesh for rockfall neeting system sheet
|
Model |
Wire Net Size |
Supporting Rope Size |
Sewing Rope Size |
Note |
|
GSS2A |
Spider spiral rope mesh: Wire diameter: 3x3 mm. Mesh size: 250 mm - 300 mm. Roll size: 3.5 m x 10 m. Chain link mesh: Wire diameter: 2.2 mm. Hole size: 50 mm x 50 |
Steel anchor diameter: 16 mm. Boundary rope: 12 mm or 16 mm. |
8 mm steel wire rope |
Double layers structure (chain link meshes and spider spiral rope mesh) Length of the wire rope anchor is 2 m - 3 m. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.