Norgren PM/31091 Single Compact Air Bellow Max. Height 140MM Air Spring

 
 
Design Specifications
 

• Body Dia.[Max]: 220 mm
• Compressed Height: 60 mm
• Temperature Range : -40℃+70℃
• Air Inlet Type: Imperial
• Stroke Length [Max]: 80 mm
• Pressure [Max]: 0-8 bar
• Height [Max]: 140 mm
• Height [Min]: 60 mm
• Air Inlet: G 3/4
• Nut/Blind Nuts: M8
• Center to Center Distance: 89 mm
• Distance Air Hole Betweeen Screw: 38 mm

 
 
 
Refer Number
 

 
 
Attention Must Be Paid When Installation The Air Spring
In designs that use air springs, care must be taken to ensure that no sharp edges are in contact with the springs of the spring element. This must verify maximum expansion and zero pressure operation, particularly for leaf and sleeve rolled leaf springs, which is a reduction in surface pressure drop in the gap between the meniscus and the piston support. The outer envelope of the air spring must clear the maximum air spring of 2 inches in diameter to allow for normal growth and misalignment.
 
 
AIRSUSTECH Air Spring Also Provide Norgren Rubber Bellows 
 

 
High-resolution Images