Light Fusible Glass Empty Glass Ampoules Liquid Medicine

Product

It refers to an injection with a hard drugs, vaccines, serum or the like fusible glass container; it is Latin ampulla transliteration. Commonly used are straight neck and curved neck. Capacity typically 1-25ml. Commonly used in injections, it is also used for packaging oral. However, it did not succeed, because the consumer is difficult to open and prone to accidents. Historical ampoules containing blood samples from the deceased

Common problems and solutions in ampoule filling and sealing edit voice

The flat head is a flat but not brushed. Cause: The preheating flame and the brushed flame are too small; the axle bearing rotation is not flexible or too small; the individual ampoule wall is too thick. Workaround: Strengthen two sets of flame fire force before and after; replace the new bearing or adjust the spring in the ampoule pressure frame, strengthen the pressure, so that the ampoule can rotate normally, form brushed wire; clear unqualified ampoule

The column is depressed in the top of the melting. Cause: Ampoule is caused by cooling shrinkage after the foam in the drawing process; the heating flame does not smrate into some of the micro-water vapor on the dry mule wall, these low-temperature water motives have a new ampoule top arc to be cold and shrink. head. Workaround: Press the method of resolving the bubble head; add a strong heating flame, so that the ampoule neck is fully heated, so that the micro-water vapor is early. 1.5 Broadle The head is not sealed at the top. Cause: Mechanical reasons; excessive bubbles; excessive gamings. Workaround: Adjust the cable to the flame level center to normal distance; according to the bubble head and the thread method.