Managed Gigabit Ethernet Switch 2.5G Fiber Din Rail DC12V Support CLI SNMP ERPS
Rugged gigabit Ethernet smart managed switch
Introduction
model name: IM-FS160GW
support web CLI SNMP management
comply with FCC and CE standards
-40℃ to + 75℃ operating temperature
meet IP40 protection degree and EMC industrial grade requirements
dual power input DC12V~52V
the reliable industrial-grade design could ensure continuous and stable operation of the automation system.
- 6x 10/100/1000Mbps Auto-sensing RJ45 ports
- 1 x 1000Mbps SFP fiber port
- Support Auto MDI/MDIX
- A store-and-forward switching mechanism
- Operating environment temperature: -40 ° ~75 ° c
- 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
Management
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
- Protocol VLAN,VLAN convert, MVR
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
- Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support Qos, transport classification Qos, Cos, bandwidth control
- (input/output direction), storm suppression ,differentiated services
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
Specification
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch (1F+6TP) |
| Model No. | IM-FS160GW |
| Port |
1 x 100/1000/2500M SFP port SM: 1310nm/1550nm, 20Km 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500m 6x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features |
Transmission mode: storage and forward System bandwidth:17Gbps (non-traffic jam) |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply |
Input voltage: DC 12-52V No-load power:5W Reverse connection: support |
| Environment |
Working temperature: -40~75°C Storage temperature: -40~85°C Working humidity: 10%~90%, non-condensing Storage humidity: 10%~95%, non-condensing |
| Industry Standards |
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 Traffic Control: NEMA-TS2 Vibration: IEC 60068-2-6 Freefall: IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic: EN 50121-4 |
| Safety |
CE Mark, commercial CE/LVD EN60950 |
| Mechanical information |
Shell: Corrugated metal shell Safety class: IP40 Dimension:158 x 115 x 60mm; Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
PCB Pictures
FAQ
1 Q: What is warranty time?
A: A year for commercial products and 5 years for industrial products. Technical support will be offered free.
2 Q: Do you accept sample order?
A: Yes. Sample order to check our services and quality.
3 Q:Can I have any discounts?
A: Discounts will be given to repeat orders, regular clients and discount products.
4. Does your switch support 155Mb/s tranceivers?
A: Yes, the optical speed is 100M/1000M/2500M. Please just configure 100M speed in the management interface, megabit modules are working.
5. Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
6. What is the leadtime if I order?
After receiving the payment, we start production.
If you are ordering some popular models, we usually got stock. After some testings, we will ship the materials.
If we do not have stock, production time is usually 3~5 working days for less than 50pcs/pairs.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.



