6000p/H Egg Carton Making Machine
Factory Price Full Auto Production Line Egg Carton Making Machine
Machine Introduction:
1. Pulp Moulding production line is known as egg tray line for using massively in produce egg tray.
2. Pulp Moulding production line, which uses waste paper, cardboard, leftover material of paper mill, by hydraulic pulper, mix making a certain dense pulp, and pulp is absorbed by vacuum of special metal moulding to become wet products, through drying , and shaping to become finished products.
3. Pulp Moulding Line processing makes use of recycled water and does not lead to water or air pollution. Finished packaging products can be recycled after being used in storage, transport, and sales. After shredding, they are easy to be decomposed as paper, even if discarded into the natural environment.
4. Automatic pulp molding production lines can be mass production of various food container, egg tray, lunch boxes and so on.
Specification:
|
Tech Date |
egg carton making machine |
| Production name | egg carton making machine |
| Model | 5by8 |
| Capacity | 6000pcs/h |
| No. of Molds | 40pcs forming molds plus 4 pcs transfer molds |
| Labor needed | 5 |
| Machine color | Can customize as per clients, like grey, silver, blue |
| Template Size | 1550mm*470mm |
| Dimension |
3600**2250*2500mm |
| Voltage | 380V,voltage can be customized |
| Power | 120kw |
| Mold material | Plastic or aluminum, or ABS |
| Rotary speed | 23 times per minute |
| Drying method | Brick drying line or metal drying line |
Moulding Machine Advantages:
Our Wongs six-layer metal drying line is mainly composed of a combustion chamber, an upper air duct, a lower air duct, and drying tunnel running by chains and pallets. Every two adjacent sections need to be fixed with hexagonal screws for drying. The slideway and the wind plate have been welded before leaving the factory. After the customer receives the goods, they only need to install the chain and the pallet.
Equipment process
1. Pulp system
(1) Put the raw materials into the pulping machine, add an appropriate amount of water, and stir for a long time to turn the waste paper into pulp and then put it into the pulp storage tank for storage.
(2) Put the pulp in the storage tank into the mixing tank, and adjust the pulp concentration in the mixing tank. The white water in the return tank and the thick slurry in the storage tank are further stirred by the homogenizer. After being adjusted into suitable pulp, it is put into the supply tank to be used by the forming system.
Equipment used: pulping machine, homogenizer, slurry supply pump
2. Molding system
(1) The pulp in the supply tank is fed into the forming machine, after being adsorbed by the vacuum system, the pulp is passed through the mold on the equipment, leaving the pulp on the mold to form, and the white water is absorbed and driven back into the pool by the vacuum pump.
(2) After the mold is adsorbed, the transfer mold passes the positive pressure out of the air compressor, and the molded product is blown from the forming mold to the transfer mold, and then sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, negative pressure tank, water pump, air compressor, mold cleaning machine.
3. Drying system
(1) Natural drying method: The product is dried directly by weather and natural wind.
(2) Traditional drying: brick tunnel kiln, the heat source can be natural gas, diesel, coal, dry wood, liquefied petroleum gas and other heat sources.
(3) New-type multi-layer drying line: The 6-layer metal drying line can save more than 30% energy than transmission drying. The main heat source is natural gas, diesel, liquefied petroleum gas, methanol and other clean energy sources.
4. Auxiliary packaging of finished products
Packing System: Automatic stacking and counting machine
Pre-Sales Service
* Inquiry and consulting support.
* Sample sent and confirmation.
* View our Factory.And see runing production line.
After-Sales Service
* Training how to instal the machine, training how to use the machine smoothly.
* Engineers available to service machinery overseas.
Our Company
Wongs egg tray machine machine has various types and output of paper pulp molding egg tray making machines can be supplied by our company ,such as 800-1000pcs per hour ,2000pcs per hour ,3000pcs per hour ,4000pcs per hour ,and so on. The quality of our paper egg tray making machines is superior to that of other suppliers,and our prices are lower than theirs.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.