Recycle Waste Paper Fully Automatic Egg Tray Machine Seeding Tray Making 100kw
Recycle Waste Paper Seeding Tray Making Egg Tray Making Machinery
Company Introduction
Waste paper pulp moulding egg carton tray machine is making egg tray by pulp, this production line is environment friendly machine. This machine could deal with many kinds of paper or pulp waste for making paper tray/carton package tools. Such as old newspapers, magazines, waste paper, paper scraps and so on, raw material is east to get and low cost, paper egg tray is manufactured by egg tray press machine; it's with advantages of low cost, no environmental pollution, simple fabrication process and etc, it's one kind of most common used package for egg.
Raw material:
The raw materials are mainly from various pulp boards such as reed pulp, straw pulp, slurry, bamboo pulp and wood pulp, and waste paperboard, waste paper box paper, waste white paper, paper mill tail pulp waste, etc.
Main features:
1. The machine is easy to operate
2. It is environmental protection
3. It only need a small workshop
4. The use is great, you just change the mould , you can get all kinds of trays
5. It has a small invest
Specification
|
Tech Date |
|
| Product name | 4by4 Rotary Type Pulp Molding Line Brick Dryer For Full Automatic Egg Tray Machine |
|
Model |
4by4 rotary type |
|
Capacity |
2500-3000pcs/h |
|
No. of Molds |
16pcs forming molds plus 4 pcs transfer molds |
|
Labor needed |
4-5 |
|
Machine color |
Can customize as per clients, like grey, silver, blue |
|
Template Size |
1550mm*470mm |
|
Voltage |
380V,voltage can be customized |
|
Power |
100kw |
|
Rotary speed |
18 times per minute |
|
Drying method |
Brick drying line or metal drying line |
Advantages of Waste Paper Pulp Moulding Egg Carton Tray Machine
1) Simple structure in production line type, easy in installation and maintenance.
2) The raw material is easy get, so the cost is very low, and with high profit.
3) It's environment-friendly equipment, the paper waste and water could reused at this production line.
4) Running in a high automatization and intellectualization, no pollution.
5) Saving the packing cost and the cost of whole logistic process.
Equipment process
1. Pulp system
(1) Put the raw materials into the pulping machine, add an appropriate amount of water, and stir for a long time to turn the waste paper into pulp and then put it into the pulp storage tank for storage.
(2) Put the pulp in the storage tank into the mixing tank, and adjust the pulp concentration in the mixing tank. The white water in the return tank and the thick slurry in the storage tank are further stirred by the homogenizer. After being adjusted into suitable pulp, it is put into the supply tank to be used by the forming system.
Equipment used: pulping machine, homogenizer, slurry supply pump
2. Molding system
(1) The pulp in the supply tank is fed into the forming machine, after being adsorbed by the vacuum system, the pulp is passed through the mold on the equipment, leaving the pulp on the mold to form, and the white water is absorbed and driven back into the pool by the vacuum pump.
(2) After the mold is adsorbed, the transfer mold passes the positive pressure out of the air compressor, and the molded product is blown from the forming mold to the transfer mold, and then sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, negative pressure tank, water pump, air compressor, mold cleaning machine
3. Drying system
(1) Natural drying method: The product is dried directly by weather and natural wind.
(2) Traditional drying: brick tunnel kiln, the heat source can be natural gas, diesel, coal, dry wood, liquefied petroleum gas and other heat sources.
(3) New-type multi-layer drying line: The 6-layer metal drying line can save more than 30% energy than transmission drying. The main heat source is natural gas, diesel, liquefied petroleum gas, methanol and other clean energy sources.
(4) Auxiliary packaging of finished products
After-Sales Service
* Training how to instal the machine, training how to use the machine smoothly.
* Engineers available to service machinery overseas.
FAQ
1.Q:Which country to export mainy?
A:We exported to Turkey,SaudiArabia,India,Africa,South Africa,Brazil,Egypt,Venezuela,Zambia, Colombia, Bolivia, Madagascar Costa Rica, Iran, Iraq, Vietnam,Thailand, Philippines, Côte d'Ivoire, Myanmar, Nepal etc.
2.Q:Can you give me the better price with higher quality?
A: Of course, we are the real manufactuer with our specialized team and trading partners, the quality can be assured and same time the price quoted will be best.
3.Can you offer technician aboard for training workers?
A:Yes, we have ten group of team for installation guidance aboard, two techinicians will be sent for installation guidance and trainning workers till the machine can run very normally, they will come back.
4.Q: What's the gurantee for the machine and equipments?
A: Usually the forming machine gurantee is one year, and motors gurantee is six month.
5.Where is your company located?
A: it is located in Lingshou County, Shijiazhuang city, hebei, china.
Photos for show
Flow chart
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.