3000pcs/Hr Automatic Pulping Paper Egg Tray Machine Customization Voltage
Automatic Egg Holder Production Equipment Pulping Machine Egg Tray
6 Eggs Carton Making Machinery Introduction:
Egg tray machine uses waste paper as raw materials to produce different kinds of products according to your requirements, such as egg trays, egg cartons, egg boxes, apple trays, fruit trays, industrial trays, seeding trays etc.
Raw material:
Raw material: Any kind of waste paper like old newspaper, magazines, books,A4 paper etc, and easy to get
Egg Carton Production Line Specification:
| Tech Date | |
| Production name | Automatic Egg Holder Production Equipment Pulping Machine Egg Tray |
| Model | 4by4 face rotary type |
| Production Capacity | 3000pcs/h |
| No. of Molds | 16pcs forming molds plus 4 pcs transfer molds |
| Products can be made | Egg tray 30 holes, egg box 12 cavity etc by changing mold |
| Labor needed | 50W |
| Machine color | Can customize as per clients, like grey, silver, blue |
| Template Size | 1470mm*470mm |
| Dimension | 2300*1800*1800mm |
| Voltage | 380V,voltage can be customized |
| Power8 | 80kw |
| Rotary speed | 15 times per minute |
| Drying method | Brick drying line or metal drying line |
Egg carton making machine photos show
Finished egg trays
Advantage
Our Wongs six-layer metal drying line is mainly composed of a combustion chamber, an upper air duct, a lower air duct, and drying tunnel running by chains and pallets. Every two adjacent sections need to be fixed with hexagonal screws for drying. The slideway and the wind plate have been welded before leaving the factory. After the customer receives the goods, they only need to install the chain and the pallet.
Process for egg tray machine:
Pulping system
(1) Put the raw material into the pulper and add an appropriate amount of water for a long time to stir the waste paper into pulp and store it in the storage tank.
(2) Put the pulp in the slurry tank into the pulping tank, adjust the pulp concentration in the pulping tank, and further stir through the agitator through the white water of the return pool and the thick slurry of the storage tank. After adjusting to the applicable pulp, put it into the feeding pool to be used in the molding system.
Equipment used: pulping machine, agitator, pulp pump, vibrating screen, pulp disintegrator
2. Forming system
(1) The pulp in the supply tank is supplied into the molding machine, and is adsorbed by the vacuum system, and the pulp is left on the mold by the mold on the equipment to be formed, and the white water is sucked and transported back into the pool through the vacuum pump.
(2) After the mold is adsorbed, the transfer mold is blown out by the positive pressure of the air compressor, and the molded product is blown from the molding die to the rotary mold, and is sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, vacuum tank, pump, air compressor, mold cleaning machine
3. Drying system
(1) Natural drying method: The product is dried directly by weather and natural wind.
(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas, diesel, coal, dry wood,A heat source such as liquefied petroleum gas.
(3) New multi-layer drying line: 6-layer metal drying line can save more than 30% energy compared to transmission drying. The main heat source is clean energy such as natural gas, diesel oil, liquefied petroleum gas and methanol.
Installation Instructions
The pulp tank, water tank and draining system should be built of reinforced concrete. Buyer is responsible to guarantee the power and water supply to make sure equipment and controlling cabinets can work normally.
All necessary craft pipelines (if you can provide your factory area, we can design all pipelines free of charge) and valve,
electric wires, cable, wire slots, bracket and so on. Above should be prepared in advance.
Why choose us
1.According to customer paper type, proportion, machine configuration, the size of wet/dry egg tray and other actual situation, Assist customers to analyze final pulp products shrinkage.
2. Take egg tray products as an example, according to the local market egg-packing habits, egg-packing range, for customers to choose the appropriate egg tray model.
3. After the customer receives the mould, instruct the customer to install and debug the mould.
4.Technicians would find the potential problems and solved in advance.
5. We own a large stock of mold components and parts, easily-worn parts(mesh).
6.Provide technical consultation and service to customers anytime and anywhere.
Our company
We Hebei wongs macinery equipment co., Ltd company limited has a history more than 30 years in producing pulp and paper making machines.Our products include paper making machines,pulp making machine,parts and paper converting machines such as kraft paper machines,corrugated paper machines,tissue/toilet paper machines,office paper machines, newspaper machines,and so on. We win high praise from clients at home and abroad for our sophisticated craft, high quality and excellent function.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.