Waterproof IP65 Rating Solar Wall Sconce With Light Sensor
Waterproof IP65 Rating Solar Wall Sconce With Light Sensor
| Solar cell | 5V 5W |
| Rech. batt. | Li-ion bat.,3.7V 2000mAh*3pcs |
| Lamp | 4W LED 2700K ~3100K;200 Lumens |
| Cable | 3 meters long cable |
| Swicth | Power On/OFF |
| Operation | dusk to dawn sensor, Lamp works at full brightness for first 5 hrs,after 5 hrs,lamps switch to dim mode till sun rise to save energy. |
| Discharge time | 10-12H |
| Charging Time | 8 hrs |
| Light finish | black |
| protection | IP55 |
Description:
- FUNCTION
This solar light is intelligent control with light sensor so it works On at dark and Off at day.
The solar lights can last up to 12 hours after 8 hours full charging under sunlight.
Brightness to meet your needs of bright light or dim ambient light.
The solar lights have hourly type settings to auto off after set amount of time.
At dim mode, the solar lights will stay dim after the timing off till dawn.
- Installation
1) Installation of solar panel
- Choose a place to situate the solar panel where there is abundant sunshine
during the day. This unit requires at least five hours of sunlight to charge the battery.
- Any cover or awning that shades the panel will affect its performance to charge
the battery resulting in a shorter run time of the light during the night.
- The selected location should not be near a night time light source like a porch
or street light. If the panel receives light on it at any time it will not allow the
automatic day/night sensor to turn the light on.
- Mount the solar panel box on the wall by using provided dry-anchors and
screws. The angle of solar panel is adjustable 180 degree.
2) Installation of light
- Mount the lamp arm at the desired place where you need lights at night by
using the dry-anchors and screws.
- Twist the LED bulb
- Connect LED lamp wire to battery box cable
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.




