5 Led Outdoor Solar Security Light With Motion Sensor 6m Detect Range

• APPLICATION

This solar light can be used in any location where you want quick and automated

lighting. It was originally designed for plastic toilet facilities, but can be use for a 

variety of applications. Such as canopies for bikies, sheds, plastic toilet, garages, 

carports, roof, etc.

• INSTALLATION

Easily cut a hole of 38mm diameter in roofing plate and insert the light through, 

screwing the b;ack holding plate and clear lens cover back on one in piece. 

The light will turn on automatically at night when movement detected. 

• OPERATION

The light comes with day/night sensor and also PIR motion sensor. It will be 

activated when people present or move in the detecting zone. The light will last

on as long as movement being detected and it will turn off in 45 seconds after  

people leaving detecting zone. 

• PARTS

1--- 1 x LED lamp and integrated solar panel

2---1 x Operation Manual

• FEATURES

1. Solar panel: polycrystalline 4V, 55mA

2. Rechargeable battery: lifepo4 battery 3.2V, 600mAh

3. LED: 5 pieces supper bright LEDs

4. Max.Output Lumen: 45 lumens

5. Operation mode: Light sensor and PIR motion sensor

6. Delay time:45 seconds

Notes

• In order to avoid the rain leak in through the driving hole, it is suggested

adding a round soft material between light and holding plate or use glass cement

to glue all round of the light. So that water will not leak into the house and even

vapor cannot goes into the lamp.

• Make sure the switch is on and leave it for sun charge and 8 hours is needed

for first time use.

• The light is not suggest to install where have intense air flow or over cold or

over heat place, such as air-condition, as these will influence the PIR sensor function.

• The battery is soldered in the light. Do not repair the light by yourself unless

you are a professional electrician. Or call the local retailer for replacement.