Product information:
 

The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21.

Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of approximately 20mm/s. This test pin can be equipped with 20N weight to reach the load of 30N.This scratched pin shall be used with resistance scratching tester.

Standard:IEC60335-1 clause 21 and IEC60950-1.

Application:The test pin is used to do the scratch resistant test of the electrical solid insulation surface.

Test sample:Home appliance fixed insulation accessible part and coated printed board.

Feature:Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of approximately 20mm/s. This test pin can be equipped with 20N weight to reach the load of 30N.This scratched pin shall be used with resistance scratching tester.

Technical parameters:
 

Hot Tags: scratched pin electric safety testing probes, China, manufacturers, suppliers, factory, custom, wholesale, Coupler Heating Device, Water Jet Test Chamber IPX9K, Tracking Test Equipment, Battery Impact Testing Machine, IEC60529 IP1X 50mm Sphere Test Probe, 72V5A 4ch Battery Capacity Tester