RS485 Output BOD TOC COD Probe Chemical Oxygen Demand Sensors COD Analyzer For Water Treatment
RS485 Output BOD TOC COD Probe Supplier Chemical Oxygen Demand Sensors and COD Analyzer for Water Treatment
Online analyzers can help to reduce the risk of environmental harm by detecting any changes in the quality of the water in real-time. This allows operators to quickly respond to any potential issues and take corrective action before any harm is done.
Online COD, BOD, and TSS analyzers are important tools for wastewater treatment facilities and other facilities that generate wastewater. By providing real-time data on the quality of the water, these analyzers can help to optimize the treatment process, reduce the use of chemicals and energy, and minimize the risk of environmental harm.
The optical method online COD sensor (Chemical oxygen demand sensor) is more economical and environmentally friendly than the traditional chemical method. Small in size, easy to install, and can be used for continuous online water quality monitoring. Automatic compensation for turbidity disturbances, with automatic cleaning device, optional titanium alloy (corrosion resistant).
COD sensors are mainly used for monitoring rivers, lakes, sewage, and other types of surface water, etc., and can be easily integrated into water quality monitoring systems to meet customer needs.
* Digital sensor, RS-485 output, support MODBUS
* No reagents, no pollution, more economical and environmentally friendly
* Can measure SAC, COD, TOC, and other parameters
* Automatic compensation for turbidity interference for excellent test performance
| Product name | COD sensor |
|---|---|
| Detection principle | UV245nm UV Optics |
| Measurement range DS500 (6 mm gap) |
COD 0 ~ 500 mg/lL TSS 0~600 mg/L BOD 0~300 mg / L |
| Measurement range DS500 (6 mm gap) |
COD 0 ~ 2000 mg/lL TSS 0~1000 mg/L BOD 0~1000 mg / L |
| Measurement range DS501 (1 mm gap) |
COD 6000~10000 mg/lL TSS 0~5000 mg/L BOD 0~5000 mg / L |
| Measurement accuracy | ±5% |
| Resolution | 0.01mg/L |
| Optical path | 1mm,6mm,10mm |
| Temperature range | 0~45℃ |
| Stored temperature | -40~80℃ |
| Output signal | RS-485, MODBUS protocol |
| Calibration method | 1 or 2 points |
| Automatic cleaning | Built-in cleaning brush |
| Waterproof level | IP68 |
|---|---|
| Under pressure | 1bar |
| Product material | 316/POM/Titanium alloy |
| Product Size | ∅46×218mm |
| Power information | DC 6~12V,Current <10mA |
| Cable length | Standard 5 meters |
Desun Uniwill Water quality sensors are designed to provide accurate and reliable measurements of water quality parameters, allowing for effective monitoring and management of water resources. They are commonly used in various industries and applications, including environmental monitoring, water treatment plants, aquaculture, industrial processes, and research laboratories.
We supply water quality sensors such as dissolved oxygen, COD, ammonia nitrogen, PH, ORP, conductivity, turbidity, sludge concentration, chlorophyll, blue-green algae, oil in water, nitrate, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.