High Temperature C276 Hastelloy Strip Coil Sheet Plate Strip
High Temperature C276 Hastelloy Strip Coil Sheet Plate Strip
H Astelloy Strip Coil High Temperature H Astelloy C276 Sheet Plate Strip Price
-
Material:Metal,Inconel alloy 725HS Alloy Steel Plates Inconel 725HS Alloy Plates Inconel 725HS Alloy
-
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
-
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
-
Length: Fixed length or random length or based on the customer's special requirement
-
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Products Details
Inconel alloy 725HS Hot rolled Alloy Steel Plates Inconel 725HS Forged Alloy Plates Inconel 725HS ESR refined Alloy
|
Chemical Composition (weight%): |
C (％): ≤ 0.08 |
|
Si (％): ≤ 0.20 |
|
|
Mn(％): ≤ 0.35 |
|
|
Cr(％):19.0~22.5 |
|
|
Ni(％):55.0~59.0 |
|
|
Mo (％): 7.00~9.50 |
|
|
Al (%): ≤ 0.35 |
|
|
Ti (%): 1.00~1.70 |
|
|
Fe (%): Remainder |
|
|
(Nb+Ta)(%):0.70~1.20 |
|
|
Co (%): ≤ 20.0 |
|
|
Mechanical Properties Under |
Condition: |
|
Tensile strength,σb/≥ MPa: |
|
|
Yield strength, σ0.2/≥ MPa: |
|
|
Reduction of area, ψ≥(％): -Elongation, δ ≥(％): |
|
|
Reduction of area, ф ≥ (％): |
|
|
Hardness | HBW: |
Applications:
Inconel alloy 725HS Hot rolled Alloy Steel Plates Inconel 725HS Forged Alloy Plates Inconel 725HS ESR refined Alloy
Starndard specification for high-temperature bolting, with expansion coefficients comparable to austenitic stainless steel with yield strength ranging from 345 to 827 MPa for use in high-temperature service such as fasteners for pressure vessel and valve flanges.
Inconel alloy 725HS Hot rolled Alloy Steel Plates Inconel 725HS Forged Alloy Plates Inconel 725HS ESR refined Alloy
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of Inconel alloy 725HS Hot rolled Alloy Steel Plates Inconel 725HS Forged Alloy Plates Inconel 725HS ESR refined Alloyand test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.