25ton Air Cooled Industrial Water Chiller for Injection Molding Machine
25ton Industrial Water Chiller Units For Injection Molding Machine IMM
After the plastic pellets are heated and melted in the injection molding machine and then taken into the mold to condense, the mold is opened and ejected to form the plastic workpiece. In the continuous production process, the chilled water system of the industrial chiller is required to cool the mold to reduce the plastic condensation time and improve the workpiece size accuracy, molding quality and oral quality. This is the working principle of the injection molding machine chiller.
Specification
|
Item Model |
ACK-25(D) | |
| Nominal cooling capacity | Kcal/h | 62952 |
| kw | 73.2 | |
| Input power | kw | 22.64 |
| Power supply | 3PH 380V 50HZ | |
| Refrigerant | Type | R22 |
| Type of control | Expansion valve | |
| Compressor | Type | Hermetic scroll |
| Power(kw) | 18.6 | |
| Condenser | Type | Finned copper tube + low noise outer rotor fan |
| Power(kw) | 1.84 | |
| Cooling air flow(m3/h) | 30000 | |
| Evaporator | Type | Shell and tube |
| Chilled fluid flow(m3/h) | 12.62 | |
| Volume(L) | 170 | |
| Inlet/outlet pipe caliber(inch) | 2-1/2 | |
| Pump | Power(kw) | 2.2 |
| Flow (m3/h) | 2.2 | |
| Lift(m) | 20 | |
| safety protection | compressor over temperature protection, over load protection, high and low pressure protection, flow switch protection, reversed and lacking phase protection, anti-freezing protection,fusible protection. | |
| Weight | kg | 1300 |
| Dimension | mm | 2000*1480*1950 |
Why choose a chiller to cool the injection molding machine
- A mold is a heat exchanger. The heat is transferred from the molten plastic to the mold, and then from the mold to the continuously circulating cooling medium - ice water. Only a small part enters the air and the die plate of the injection molding machine.
- As we all know, a considerable part of the plastic molding cycle is used for cooling, sometimes accounting for more than 80% of the plastic molding cycle. Therefore, it is absolutely necessary to control the cooling time to a minimum.
- For example, the molding cycle of a mold is generally 20 seconds. If the water in the original cooling tower is replaced with ice water produced by the chiller for cooling, it can be shortened to 16 seconds.
- Although the initial cost of choosing to equip a chiller is higher, it can increase production by 20%, and in long-term production, it can achieve great benefits.
THE AFTER-SALE SERVICE OF ANGES CHILLER!
- After finish the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools
- After the commissioning, we will package the equipment by standard export package for shipment.
- Engineers, sales managers and after-sales service manager will form a after-sales team, online and off line, to follow the customers' project.
FAQ
1.How does a chiller system work?
Chiller has two circulation,one is process water circulation,the other is refrigerant gas circulation.Heat picked up from the process.Heat transfers to refrigerant circulation.Heat is remove to air or water.
2.How to calculate cooling capacity for chillers?
Cooling Capacity(kw)= Flow Rate(m3/h)*Temp Change(T1-t2)/0.86
Heat Load= C(specific heat)* M(quality output per hour )*Temp Change(T1-T2)
3.How can we do for chiller maintenance ?
Step 1: Keep Tubes Clean
Step 2: Ensure a Leak-free Unit
Step 3: Sustain Proper Water Treatment(prevent scale, corrosion)
Step 4: Analyze Oil and Refrigerant
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.