Turnkey Pcb Fabrication And Assembly HASL SMT SMD Board Assembly
Metal Base Plate Printed Circuit Board Fabrication SMT/SMD Assembly
Printed Circuit Board Fabrication Description:
1. Designability
Requirements for various properties of PCB (electrical, physical, chemical, mechanical, etc.) can be achieved through design standardization, normalization, etc. In this way, the design time is short and the efficiency is high.
2. Assemblability
PCB products not only facilitate the standardized assembly of various components but also enable automated and large-scale mass production. In addition, the overall assembly of the PCB and various other components can also form larger components, systems, and even complete machines.
3. Maintainability
Since the components of PCB products and various components are assembled in a standardized design and large-scale production, these components are also standardized. Therefore, once the system fails, it can be replaced quickly, conveniently, and flexibly, and the work of the system can be quickly restored.
Printed Circuit Board Fabrication Parameters:
| Layer | 2-64 |
| Thickness | 0.3-6.5mm |
| Copper Thickness | 0.3-12 oz |
| Min Mechanical Hole | 0.1mm |
| Min Laser Hole | 0.075mm |
| HDI | 1+n+1,2+n+2,3+n+3 |
| Max Aspect Ratio | 20:01 |
| Max Board Size | 650mm*1130mm |
| Min Width/Space | 2.4/2.4mil |
| Min Outline Tolerance | ±0.1mm |
| Impedance Tolerance | ±5% |
| Min PP Thickness | 0.06mm |
| Bow &Twist | ≤0.5% |
| Materials | FR4, High-Tg FR4, Rogers, Nelco, RCC, PTFE, M4, M6, TU862, TU872 |
| Surface Finished | HASL, HASL Pb Free Immersion Gold/Tin/Silver Osp, Immersion Gold+OSP |
| Special Capability | Gold Finger Plating, Peelable, Carbon ink |
FAQ:
Q. What service can you supply?
TongZhan was founded in 2011 and is committed to being a leading one-stop EMS provider. We specialize in high-speed turn-key PCB services: PCB design, Fabrication, Components sourcing, PCBA, and Supply Chain service.
Q. How is the delivery?
Usually, our delivery time is about four weeks, but it depends on the actual situation when we receive your order.
If your order is urgent, please contact us directly, and we will prioritize and do our best to give you a satisfactory delivery time.
Printed Circuit Board Fabrication Introduction:
The printed circuit board has good product consistency, and it can adopt a standardized design, which is conducive to the realization of mechanization and automation in the production process. At the same time, the entire printed circuit board that has been assembled and debugged can be used as an independent spare part, which is convenient for the exchange and maintenance of the whole product. At present, printed circuit boards have been widely used in the manufacture of electronic products.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.