ChongMing Group (HK) Int'l Co., Ltd
                                                                                                           
Verified Supplier
18 Years
Since 2008
Menu

Programmable Circuit Board C8051F330-GMR Mixed-Signal ISP Flash MCU

Price Negotiable
Price: Negotiation
MOQ: 5pcs
Delivery Time: 1 Day
Product Description

 Programmable Circuit Board C8051F330-GMR Mixed-Signal ISP Flash MCU

 


C8051F330-GMR Full Speed USB Flash MCU Famil

Analog Peripherals

- 10-Bit ADC (‘F330/2/4 only)

• Up to 200 ksps

• Up to 16 external single-ended or differential inputs

• VREF from internal VREF, external pin or VDD

• Internal or external start of conversion source

• Built-in temperature sensor - 10-Bit Current Output DAC (‘F330 only) - Comparator

• Programmable hysteresis and response time

• Configurable as interrupt or reset source

• Low current (0.4 µA) On-Chip Debug

- On-chip debug circuitry facilitates full speed, nonintrusive in-system debug (no emulator required)

- Provides breakpoints, single stepping, inspect/modify memory and registers

- Superior performance to emulation systems using ICE-chips, target pods, and sockets

- Low cost, complete development kit Supply Voltage 2.7 to 3.6 V

- Typical operating current: 6.4 mA at 25 MHz; 9 µA at 32 kHz

- Typical stop mode current: 0.1 µA

Temperature Range: –40 to +85 °C

 

High Speed 8051 µC Core

- Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks

- Up to 25 MIPS throughput with 25 MHz clock

- Expanded interrupt handler Memory

- 768 bytes internal data RAM (256 + 512)

- 8 kB (‘F330/1), 4 kB (‘F332/3), or 2 kB (‘F334/5) Flash; In-system programmable in 512-byte Sectors

—512 bytes are reserved in the 8 kB devices Digital Peripherals

- 17 Port I/O; All 5 V tolerant with high sink curren

t - Hardware enhanced UART, SMBus™, and enhanced SPI™ serial ports

- Four general purpose 16-bit counter/timers

- 16-Bit programmable counter array (PCA) with three capture/compare modules

- Real time clock mode using PCA or timer and external clock source Clock Sources

- Two internal oscillators:

• 24.5 MHz with ±2% accuracy supports crystal-less UART operation

• 80/40/20/10 kHz low frequency, low power

- External oscillator: Crystal, RC, C, or clock (1 or 2 pin modes)

- Can switch between clock sources on-the-fly; useful in power saving modes

20-Pin QFN Package

 

 

 

Absolute Maximum Ratings*

Parameter Min Max Unit
Ambient temperature under bias -55 125 °C
Storage Temperature -65 150 °C
Voltage on any Port I/O Pin or RST with respect to GND -0.3 5.8 V
Voltage on VDD with respect to GND -0.3 4.2 V
Maximum Total current through VDD and GND   500 mA
Maximum output current sunk by RST or any Port pin   100 mA

 

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company ChongMing Group (HK) Int'l Co., Ltd
Location Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN
Contact Person Doris Guo

Request A Quote

Please check your email address.
Your message must be at least 20 characters.