China Mill Crusher Laboratory Crusher Discharge Particle Size 5-25mm for sale

Mill Crusher Laboratory Crusher Discharge Particle Size 5-25mm

Price Negotiable

Price: Negotiable

MOQ: 1set

Delivery Time: 15-35days

Brand: KELI

Product Description

Mill Crusher Laboratory Crusher Discharge Particle Size 5-25mm

Product parameters
Model		KL-100x60	KL-100x150	KL-150x125	KL-100x125	KL-Disc
Feed particle size	mm	50	100*150	125*150	100*125	175mm (diameter)
Maximum feed particle size	mm	50	80	120	100	2-3
Discharge particle size	mm	3-10	5-25	3-25	2-35	0.15-1
Motor Power	kw	1.5	2.2	3	3	1.1
Rotating speed	r/min	600	368	368	375	78
Machine weight	kg	120	120	280	250	95
Productivity	kg/h	45-550	480-1800	500-3000	30-2000	25
Voltage	v	380	380	380	380	380
Dimensions	mm	700380480	700380480	1000450520	1000550580	690465400

Pig iron side plate
The side plates on both sides of the bearing are all made of pig iron, which has high strength and high temperature resistance, and can prevent high temperature lubricating oil from splashing out.
Adjusting screw
solid iron adjusting screw, good feel, strong and durable.
Heightened and thickened base
The base is all made of thickened and heightened channel steel, which is heavier and more stable in operation.
Branded bearings
The bearings adopt well-known brand products, which have better concentricity and are more durable.

Proper use

Before starting the laboratory crusher, rotate the rotor by hand, check whether the teeth and claws, hammer and rotor operation is flexible and reliable, whether there is collision in the shell, whether the rotor rotation direction is the same as the direction indicated by the machine arrow, whether the power machine and crusher lubrication is good.
Laboratory crusher and power unit should be firmly installed. If the crusher is fixed for a long time, it should be fixed on a cement foundation; if the crusher is mobile, the unit should be installed in the seat made of angle iron, and to ensure that the power machine (diesel engine or electric motor) and the pulley slot of the crusher is in the same rotary plane.
The laboratory crusher after installation to check the fastening of each fastener, if loose to tighten. At the same time to check the belt tightness is appropriate.
When the machine is working, workers should pay attention to the operation of the laboratory crusher at all times, feed the material evenly to prevent blocking bogging, do not work for a long time overload. If you find vibration, noise, high temperature of the bearing and body, spraying material outward, you should stop immediately to check, and continue to work only after troubleshooting.
Do not casually replace the pulley, in case the speed is too high to make the crushing chamber explosion, or the speed is too low to affect the efficiency of the crusher.
The crusher should be idle for 2-3 minutes after starting, in the absence of abnormalities before feeding work.