China Pediatric Disposable Infusion Set 100ml 150ml Medical Disposable Burette Infusion Set for sale

Pediatric Disposable Infusion Set 100ml 150ml Medical Disposable Burette Infusion Set

Price Negotiable

Price: Negotiable

MOQ: 10,000pcs

Delivery Time: 30days

Brand: Easier Way Med

Product Description

Medical disposable pediatric burette infusion set

Components:Disposable burette-type infusion set is made up of protective cap, closure-piercing device, drip chamber, tubing, flow regulator, fluid filter, air filter, injection site, 15.3x54MM drip chamber, 60drop/ml, hypodermic needle or intravenous needle and other accessories.

List of main raw materials for burette-type infusion sets:

Medical grade PP, PE, ABS
Medical grade PVC for burette-type infusion sets
Colorant for burette-type burette-type infusion set molding
Injection site for adding medicine
Hypodermic needle and intravenous needle for burette-type infusion set
PE individual package of burette-type infusion set
Dialyzing paper for blister package of burette-type infusion set
Plastic film for individual package of burette-type infusion set
PE medium packing bag for burette-type infusion set
White board box for burette-type infusion set inner packing
Corrugated carton for burette-type infusion set outer packing

Intended Use of the Product:

The disaposible burette-type infusion set is maily applied to clinical intravenous infusion in medical institutions.
The disaposible burette-type infusion set should be nonpoisonous, sterile, non-pyrogen and no subcutaneous stimulation after sterilized by ethylene oxide gas. The hemolysis rate should be less than 5%, and the leftover of ethylene oxide gas should be no more than 0.5mg per piece.

Features of burette infusion set:

Biological Performance
Sterilization	EO gas sterilization
Pyrogen	Pyrogen-free
Chemical Performance
Reducing Material	0.005mol/L Sodium thiosulfate Consumption Difference ≤2.0mL
Titration acidity or alkalinity	Volume of required sodium hydroxide standard solution or hydrochloric acid standard solution≤1ml
Ultraviolet Absorption	≤0.1
Residue on Evaporation	The total amount of dry residue shall not exceed 5 mg
EO Remnants	No more than 0.5mg for each set
Physical Performance
Particulate contamination	Contamination index limit N≤90
Leakage test	Immerse the set with one end blocked in water at (40±1)℃ and apply pressure of 20KPa for 15s; fill the set with degassed, distilled water, subject it to an internal excess pressure of -20KPa at (40±1)℃ for 15s, air leakage shall not be observed.
Tensile strength	Connection between components, protective jacket excluded, should be able to withstand a static force of not less than 15N for 15s.
Closure-piercing device	Pierce and penetrate closure of a fluid container without pre-piercing, no coring should occur.
Air Filter	Air filter rate ≥90％,Flow reduction by air filter＜20%
Soft Tube	Tube should be transparent or sufficiently translucent, when bubbles pass by, normal or corrected eyesight is able to observe air and water interface.
Liquid Filter Rate	Liquid filter rate≥80％
Volume Tolerance	Tolerance on capacity greater than half of nominal capacity should be ± 4% of expelled volume.
Flow Regulator	Flow regulator can be used without damaging the tube during an infusion, and no deleterious reactions occur when stored with tube.
Flow Rate	Under 1m static head, for 20 drops/ml drip chamber, the infusion set shall deliver not less than 1000ml of sodium chloride solution (ρ=9g/L) within 10min; for 60 drops/ml drip chamber, the infusion set shall deliver not less than 1000ml of sodium chloride solution within 40min.