ODM 6 Port PoE Data Industrial Managed Switch 10/100/1000Mbps
6 port managed Industrial ethernet Switch
Product Features of managed hardened switch
![]()
4 x 10/100/1000Mbps Auto-sensing RJ45 ports- 1x 10/100/1000Mbps SFP fiber port
![]()
4 KV Ethernet surge protection, adapt to a harsh outdoor environment![]()
Support Auto MDI/MDIX![]()
Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard![]()
IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant![]()
A store-and-forward switching mechanism![]()
Operating environment temperature:-40 ° ~85 ° c![]()
Support cable diagnosis and can locate the fault point![]()
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption![]()
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)![]()
Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services![]()
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR![]()
Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation![]()
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching![]()
Support IGMP agent report, MLD snooping![]()
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2![]()
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet![]()
Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing![]()
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82![]()
Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP![]()
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL
4 x 10/100/1000Mbps Auto-sensing RJ45 ports
4 KV Ethernet surge protection, adapt to a harsh outdoor environment
Support Auto MDI/MDIX
Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
A store-and-forward switching mechanism
Operating environment temperature:-40 ° ~85 ° c
Support cable diagnosis and can locate the fault point
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
Support IGMP agent report, MLD snooping
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACLSpecification of managed industrial fiber switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch (1F+4TP) |
| Model No. | IM-FS140GW |
| Port |
1 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
|
Flow Control |
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply |
Input voltage:DC 9-52V; No-load power:5W; Reverse connection: support |
| Industry Standards |
EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC 60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial ; CE/LVD EN60950 |
|
Single-mode |
20, 40,60, 80,100,120Km,optional |
|
Multi-mode |
550m |
Application
Certification
Stable and reliable
— Low power consumption, fan-less design, metal shell.
— Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
— CE, FCC, RoHS.
— The user-friendly panel, it can show the device status through the LED indicator of PWR,SYS, Link, PoE.
FAQ:
Q1: Can i get a lower price? Any discount?
A1: Yes, we can offer discount for large quantity.
Q2: Can i get a free sample?
A2: Sorry, our sample is not for free.
Q3: How about the label and the logo?
A3: Customize label and logo is workable.
Q4: How about the MOQ?
A4: MOQ is 1PC
Q5: Warranty and after-sales issues.
A5: All our goods are 3 years warranty and our engineer will be online for any after-sales questions.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.