Disposable Infusion Set I.V. Set with flow regulator 20 drops per 1ml

Sterile Infusion Set with Needle

Component:

1.ABS spike with wing

2.Air vent

3.Large drip chamber

4.Drug filter

5.150cm PVC tube

6.ABS flow regulator – Large size

7.Y injection connector 

8.Luer lock

9.Cap

10.20drops≈1ml (1 drop ≈ 0.05ml )

Usage Instruments

1.Close the roller clamp 

2.Remove the cover from plastic lancet

3.Punch the lancet into the fluid container

4.Fix the metal needle to the vein part

5.Open the roller clamp and expel the air bubbles

6.Closed the roller clamp 

7.Apply the vein needle to the patient

8.Adjust the flow rate

Store condition: 

Do not store at extreme temperature and humidity

Discard after single use

Sterilized by E.O.   NON TOXIC  NON PYROGENIC

Size:

Precautions:
1. If a disposable infusion set is not cleaned and disinfected in a timely manner after use, it may also cause bacteria to enter the blood through the needle, leading to blood infection.

2. Proper cleaning and disinfection can be carried out if properly stored. When cleaning and disinfecting disposable infusion sets, they should be disassembled first, and then cleaned and disinfected. 75% alcohol solution or iodophor solution can be used for disinfection, which generally does not affect the body.

3.During infusion, attention should be paid to the rate of medication infusion. If any discomfort occurs, it is necessary to inform the doctor in a timely manner to avoid any discomfort symptoms. During the infusion period, it is important to rest more and avoid excessive fatigue. At the same time, it is also important to avoid eating spicy and stimulating foods to avoid affecting the therapeutic effect of the medication.

Operation method
Before use, medical personnel check the disinfection validity period and packaging of the disposable infusion set for any air leakage or other abnormalities. Remove the infusion set, insert the insertion needle part into the infusion bottle (if it is an infusion bag, unless it is an infusion set that integrates the intake pipe and the insertion needle, there is no need to open the intake device, that is, insert the intake needle or open the intake hole), hang the infusion bottle on the infusion rod, exhaust until the drug flows to the lower end of the infusion tube, and close the regulator tightly, Then needle the vein into the disinfected vein, fix it, loosen the tourniquet, and adjust the flow rate.

Product photo:

For more product details and quotations, please contact us: sales@yilimed.com