VATASA 2 Channel Audio Power Amplifier 600W 800W 1000W Customized
Price:
$80.00 - $470.00/pieces
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
VATASA
Product Description
Product Description
VATASA Series professional 600W 800W 1000W 2 channel audio high power amplifier
1.Mains Power Switch
When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4 seconds, there will be a
clicking denote that soft start finished. And more 1-2 seconds later, there will be another “clicking”, the amplifier
is connected with speaker and ready to work.
2.CH-1/CH-2 Input level control
Adjust it to get the volume desired. Use CH-1 control only while amplifier is set in Bridge or Parallel mode.
3.Signal LED
The green signal led indicates that a music signal is present at this channel input.
4.CH-1/CH-2 Protection indicating LED
This red LED will light up when the amplifier is running un-stable or went in to thermal protection after the power
elements temperature over 90℃.
5.Clip LED
Turns on just before the maximum, distortion free, output level of the amplifier. The clip leds may turn on shortly from
time to time but they may certainly not turn on for longer periods. In this case you have to turn the output level down!
When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4 seconds, there will be a
clicking denote that soft start finished. And more 1-2 seconds later, there will be another “clicking”, the amplifier
is connected with speaker and ready to work.
2.CH-1/CH-2 Input level control
Adjust it to get the volume desired. Use CH-1 control only while amplifier is set in Bridge or Parallel mode.
3.Signal LED
The green signal led indicates that a music signal is present at this channel input.
4.CH-1/CH-2 Protection indicating LED
This red LED will light up when the amplifier is running un-stable or went in to thermal protection after the power
elements temperature over 90℃.
5.Clip LED
Turns on just before the maximum, distortion free, output level of the amplifier. The clip leds may turn on shortly from
time to time but they may certainly not turn on for longer periods. In this case you have to turn the output level down!
6.Bridge mode indicating LED
Indicate the amplifier is working under BRIDGE mode, the indicator is lighten , and the input signal only acts on CH-1
7.Parallel mode indicating LED
Indicate that the amplifier is working under parallel mode, the indicator is lighten, input signal only acts on CH-1.
8.Stereo mode indicating LED
These green LED will light up while the input signal is connected, the amplifier is working under stereo mode.
Indicate the amplifier is working under BRIDGE mode, the indicator is lighten , and the input signal only acts on CH-1
7.Parallel mode indicating LED
Indicate that the amplifier is working under parallel mode, the indicator is lighten, input signal only acts on CH-1.
8.Stereo mode indicating LED
These green LED will light up while the input signal is connected, the amplifier is working under stereo mode.
1.MAINS POWER SUPPLY CORD
2.CH-1/CH-2 SPEAKON OUTPUT
Used by a standard SPEAKON connector.
3.CH-1/CH-2 BINDING POST OUTPUT
Used by a standard binding connector.
4. OUTPUT MODE SET SWITCH.
BRIDGE MONO MODE. Sends CH-1 signals out-of-phase to CH-2,producing twice the normal voltage swing
between the two RED speaker terminals (CH-1 RED is defined as positive).Only CH-1 controls and input are effective.
STEREO MODE. Each channel operates independently.as usual.
2.CH-1/CH-2 SPEAKON OUTPUT
Used by a standard SPEAKON connector.
3.CH-1/CH-2 BINDING POST OUTPUT
Used by a standard binding connector.
4. OUTPUT MODE SET SWITCH.
BRIDGE MONO MODE. Sends CH-1 signals out-of-phase to CH-2,producing twice the normal voltage swing
between the two RED speaker terminals (CH-1 RED is defined as positive).Only CH-1 controls and input are effective.
STEREO MODE. Each channel operates independently.as usual.
PARALLEL INPUT MODE. Sends CH-1 signals out CH-2,Only CH 1 controls and input are effective.
NOTE: speaker connections work as usual,Never connect the red output terminals directly together.
5.CH-1/CH-2 XLR INPUT CONNECTOR
Standard XLR (male) socket for input signal link.
Pin1: signal ground, Pin2: signal+, Pin3: signal-
6. CH-1/CH-2 XLR OUTPUT CONNECTOR
NOTE: speaker connections work as usual,Never connect the red output terminals directly together.
5.CH-1/CH-2 XLR INPUT CONNECTOR
Standard XLR (male) socket for input signal link.
Pin1: signal ground, Pin2: signal+, Pin3: signal-
6. CH-1/CH-2 XLR OUTPUT CONNECTOR
Specification
|
|
H-6
|
H-8
|
H-10
|
||
|
Power handling
|
600W*2(8Ω)/900W*2(4Ω)
|
800W*2(8Ω)/1200W*2(4Ω)
|
1000W*2(8Ω)/1500W*2(4Ω)
|
||
|
Signal to noise ratio
|
≥ 95dB
|
≥ 95dB
|
≥ 95dB
|
||
|
Output interface
|
Speakon and Binding
|
Speakon and Binding
|
Speakon and Binding
|
||
|
Input sensitivity
|
0.775V
|
0.775V
|
0.775V
|
||
|
Input impedance
|
20kΩ/Balanced,10kΩ/un-Balanced
|
20kΩ/Balanced,10kΩ/un-Balanced
|
20kΩ/Balanced,10kΩ/un-Balanced
|
||
|
Distortion
|
≤ 0.03%
|
≤ 0.03%
|
≤ 0.03%
|
||
|
F=1KHz 8 OHMS
|
> 240
|
> 240
|
> 240
|
||
|
Frequency response
|
20Hz-20kHz, ±1dB
|
20Hz-20kHz, ±1dB
|
20Hz-20kHz, ±1dB
|
||
|
Power supply
|
AC: 220-230V 50Hz
|
AC: 220-230V 50Hz
|
AC: 220-230V 50Hz
|
||
|
NW(kg)
|
10.6
|
12.4
|
13.5
|
||
|
Size(w*d*h)
|
482*326*88mm
|
482*326*88mm
|
482*326*88mm
|
||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Guangzhou Concord Sound Industrial Co., Ltd.
Location
No. 36 Daping Industrial, Shatou street, Shiqiao, Panyu District, Guangzhou City, Guangzhou, Guangdong, China
Contact Person
Cassie