A2FO Fixed Axial piston pumps , High pressure pump , Open circuit pumps

The pump A2FO is designed to be used in open circuits.
The project planning, installation and commissioning of the axial piston unit requires the involvement of qualified personnel.
Before using the axial piston unit, please read the corresponding instruction manual completely and thoroughly. If necessary, these can be requested from Bosch Rexroth.
During and shortly after operation, there is a risk of burns on the axial piston unit. Take appropriate safety measures (e. g. by wearing protective clothing).
Depending on the operating conditions of the axial piston unit (operating pressure, fluid temperature), the characteristic may shift.

Technical data

Features

– Fixed pump with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in an open circuit

– For use in mobile and stationary applications

– The flow is proportional to the drive speed and displacement

– The drive shaft bearings are designed for the bearing service life requirements usually encountered in these areas

– High power density

– Small dimensions

– High total efficiency

– Economical design

– One-piece tapered piston with piston rings for sealing