360ML injection anchor epoxy structural adhesive designed for building rebar planting applications. This high-strength construction adhesive provides reliable anchoring force for reinforced concrete structures.

• Room-temperature curing with high bonding strength
• Strong adhesion to rebar and concrete materials
• Excellent durability with anti-aging, acid, alkali, and water resistance
• Low shrinkage during hardening to prevent hollowing or cracks
• Superior toughness and impact resistance after curing
• Wide glue-mixing ratio for easy on-site operation
• Good temperature resistance allowing post-welding after rebar embedding
• No mixing required for easy operation
• Hard pack packaging for protection

1. Drill holes at designated positions using an electric drill according to design requirements
2. Clean holes thoroughly using brush or blower, then wipe with alcohol for dry, clean surface
3. Treat rebar surface by removing rust and oil stains with wire brush, then clean with alcohol
4. Mix components A and B according to product manual specifications and stir evenly
5. Inject mixed adhesive into holes using glue injector or syringe (approximately 2/3 of hole depth)
6. Quickly insert treated rebar into hole, rotating to distribute adhesive evenly and remove air
7. Allow proper curing time without disturbing rebar (typically several hours to days at normal temperature)