24 Core Optical Fiber Cables ADSS All Dielectric Self Supporting Cable
ADSS (All Dielectric Self supporting) Outdoor Optical Fiber Cable is a non-metallic, self-supporting fiber optic cable that does not require the use of other supporting structures such as cables or messenger wires to support its own weight. This type of cable is suitable for fiber optic communication in power lines because it can be installed along the path of the power line while avoiding contact with the power line and reducing electromagnetic interference.
we manufactures a wide range of cables from 2-144fibers with a variety of designs to meet the demands of most installation conditions. Only the highest quality materials are used in our fiber optic cables to ensure that the cable strength and optical integrity are not compromised. Rugged jacket materials and the addition of armor provide the right level of protection.
Features Of ADSS Fiber Cable:
1. Made of non-metallic materials, with excellent insulation and high temperature resistance
2. Reinforced components inside, no additional support structure is required
3. Excellent tensile strength and high temperature resistance
4. Corrosion resistance performance
Application Of ADSS Fiber Cable:
1. Adopted to outdoor distribution
2. Applied to power communication
3. Long distance and local area network communication.
4. Aerial installation and other harsh environments
Pakcgage&Shipping :
Specification
| Cable Parameter | |||
| Item | Specification | ||
| Fiber Count | 2 | 4 | |
| Sub-unit Jacket | Material | LSZH | |
| Thickness | 0.4mm±0.05mm | ||
| OD | 2.0mm±0.2mm | ||
| Armored Layer | Material | SUS204 | |
| OD | 4.8mm±0.3mm | 6.0mm±0.3mm | |
| Thickness | 0.4mm±0.05mm | ||
| Gap | 0.3mm±0.10mm | ||
| Strength Member | Aramid Yarn | ||
| Outer Jacket | Material | LSZH | |
| Color | Black | ||
| Thickness | 0.9mm±0.1mm | 1.1mm±0.1mm | |
| OD | 7.0mm±0.3mm | 7.5mm±0.1mm 8.0mm±0.1mm |
|
| Mechanical and Environmental Characteristics | |||
| Item | Specification | ||
| Fiber Count | 2 | 4 | |
| Tension Resistance (N) | Long Term | ≥ 600 | ≥ 800 |
| Short Term | ≥ 1000 | ≥ 1200 | |
| Crush Resistance (N/10cm) | ≥ 3000 | ||
| Nominal Weight (kg/km) | 65 | 85 | |
| Operating Temperature ( ºC) | -40 ~ +80 | ||
| Storage Temperature ( ºC) | -40 ~ +80 | ||
| Fiber Parameters | |||||
| Single Mode | |||||
| Item | Unit | G652D | G657A1 | G657A2 | |
| Mode Field Diameter | 1310nm | μm | 9.1±0.4 | 8.8±0.4 | 8.8±0.4 |
| 1550nm | μm | 10.4±0.5 | 9.8±0.5 | 9.8±0.5 | |
| Cladding Diameter | μm | 125±1 | 125±0.7 | 125±0.7 | |
| Cladding Non-circularity | % | ≤ 1 | ≤ 0.7 | ≤ 0.7 | |
| Core-cladding Concentricity Error | μm | ≤ 0.6 | ≤ 0.5 | ≤ 0.5 | |
| Coating Diameter | μm | 245±7 | 245±5 | 245±5 | |
| Coating Non-circularity | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | |
| Cladding-coating Concentricity Error | μm | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | |
| Cable Cutoff Wavelength | nm | ≤ 1260 | ≤ 1260 | ≤ 1260 | |
| Attenuation Coefficient | 1310nm | dB/km | ≤ 0.4 | ≤ 0.4 | ≤ 0.4 |
| 1550nm | dB/km | ≤ 0.3 | ≤ 0.3 | ≤ 0.3 | |
| Multimode | |||||||
| Item | Unit | 62.5/125 | 50/125 | OM3-150 | OM3-300 | OM4 | |
| Core Diameter | μm | 62.5±2.5 | 50±2.5 | 50±2.5 | 50±2.5 | 50±2.5 | |
| Cladding Diameter | μm | 125±1.0 | 125±1.0 | 125±1.0 | 125±1.0 | 125±1.0 | |
| Core Non-circularity | % | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | |
| Cladding Non-circularity | % | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | |
| Core-cladding Concentricity Error | μm | ≤ 1.5 | ≤ 1.5 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | |
| Coating Diameter | μm | 245±7 | 245±7 | 245±7 | 245±7 | 245±7 | |
| Coating Non-circularity | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | |
| Cladding-coating Concentricity | μm | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | |
| OFL Bandwidth | 850nm | MHz·km | ≥ 160 | ≥ 500 | ≥ 700 | ≥ 1500 | ≥ 3500 |
| 1310nm | MHz·km | ≥ 500 | ≥ 500 | ≥ 500 | ≥ 500 | ≥ 500 | |
| Attenuation Coefficient | 850nm | dB/km | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 |
| 1310nm | dB/km | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | |
FAQ
Q1: What is the warranty of FiberMania's fiber patch cord?
A: FiberMania warrants that all fiber patch cords supplied are free from defects in material and workmanship for a period of
five (5) years from the date of supply. All fiber optic bulk cables are UL profiled and every single cable is 100% tested.
Q2: Is it possible to customize our brand information on your fiber cable?
A: Yes, we can print your brand name onto our cable jacket and 1KM total cable length is requested.
Q3: Can you do 3D interferometer test?
A: Yes, we do the 3D test per our customer's request, we can have the pass rate over 90% and even 100% if necessary.
Q4: What is your MOQ of your products?
A: We only have MOQ for some special customized cable order, we request 1km as the total length of the bulk cable, you may
consider stock the bulk cable with us for your urgent order production.
Q5: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under
50 US dollars.
Q6: Do you accept OEM and ODM orders?
A: Absolutely yes, we have been doing OEM services since we start in this business, and for every single label, printing, bag and
carton design, we always treat it seriously and do it nicely. Our engineers can help you with your current design and even can open
the new tooling for your specific project.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.