The XHHV535-4T high voltage surge generator is currently the most user-friendly trolley-type DC impulse high-voltage equipment. It can be used for shock discharge in the detection of medium and low voltage cable faults.

• High-precision test cable fault sampling waveform module
• Built-in small transformer for enhanced durability
• Automatic timing impact, manual impact, and withstand voltage test functions
• Designed to prevent damage from impact

1. Ammeter: Indication of the current size on the low-voltage side.
2. Voltmeter: Indication of high-voltage output voltage kV meter.
3. High-voltage lamp (HV): On indicates high-voltage output, off indicates no high-voltage output.
4. Power lamp (Power): After turning on the power switch, the indicator light is on.
5. Zero position lamp (Zero): Indicates that the voltage adjustment knob is in the zero position state. The high voltage can only be started when the zero position lamp is on.
6. Overcurrent protection switch: Pressing the state indicates that the overcurrent protection function has started; when it pops up, it indicates that the instrument has triggered the overcurrent protection.
7. Power switch (Power Switch): Turn clockwise to turn on the system power supply, and counterclockwise to turn off the cable fault test device.
8. Single key (Single): When the mode selection key is in the Single function, this key is valid.
9. Mode selection (Mode select): Three modes: withstand voltage (DC), single (Single), and cycle (Cycle).
10. Start button (Start): In the zero position state, press to start high voltage.
11. Stop button (Stop): Press to cut off high voltage output and automatically discharge remaining voltage.
12. Voltage control knob (Voltage control): Adjusts output voltage when in non-zero position.