Low-Voltage Surge Generator 12kV for Cable Fault Testing
The XHHV510-10L high-voltage pulse generator is primarily used for shock discharge during cable fault testing and can also be used for DC withstand voltage tests of other electrical equipment. This device integrates DC high voltage source, energy storage capacitor, and discharge ball gap components, replacing traditional heavy test transformers, operation boxes, and pulse energy storage capacitors.
- Impulse voltage: 0-12kV (optional)
- High voltage partial pressure: 2.5 class
- Built-in capacitor: 12μF
- Discharge power: 0-864J
- Output voltage polarity: negative polarity
- Impact power: 400W
- Over temperature protection: 85℃
- Working power supply: AC 220V±10%/50Hz±2Hz(60Hz)
- Ambient temperature: -20~+50℃
| Impulse voltage | 0-12kV |
| High voltage partial pressure | 2.5 class |
| Built-in capacitor | 12μF |
| Discharge power | 0~864J |
| Output voltage polarity | Negative polarity |
| Over-current protection | 8mA (more than 3 seconds) |
| Impact power | 400W |
| Over temperature protection | 85ºC |
| Volume (mm) | 540L×300W×450H |
| Weight | No more than 25kg |
| Working power supply | AC 220V±10%/50Hz±2Hz |
| Ambient temperature | -20~+60ºC |
Safety ground: The instrument shell must be reliably connected to ground to prevent .
High-voltage ground: Must be grounded reliably to prevent high-voltage leakage and discharge.
Sampling ground: The negative terminal of the pulse energy storage capacitor must be grounded reliably.
Discharge button: Press to make contact with the ball gap for manual discharge (duration ≤1s).
High voltage start/stop buttons: Control the high voltage output with visual indicators.
Voltage adjustment: Turn counterclockwise to minimum before starting, then adjust output.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.